Soy protein isolate: MOQ, packaging and ordering
Soy protein isolate can be bought in a 1 kg pouch for trial work, while a 25 kg fiber drum is the unit a production order is built around. Stock in the standard pack ships in 1–7 days once the order, specification and shipping details are confirmed. Agglomerated or instantized material and non-standard packs are made to order. What makes a quotation usable is not the minimum but the grade, the paperwork and the destination.
One pouch is a trial; one drum is a production run. The quotation is built from the grade, the documents and the destination, not from the pack size.
Why the trial pack is 1 kg
One kilogram is enough for a real bench trial because it comes from a single lot. A trial usually needs three things: powder at the intended dose, a second run to confirm the first, and a retained portion for stability or comparison. Material from one lot keeps those three consistent; a second lot would shift the ash, mesh and flavour between runs.
At 20 g of protein a day for 30 days, the protein requirement is 600 g. A 90.0% dry-basis isolate at 7.0% moisture is 83.7% as-is, so the powder need is about 717 g. That leaves roughly 280 g from a 1 kg pouch for a bench repeat or a retained sample. A 30 g daily target needs about 1.08 kg for the month, so the trial starts with two pouches.
One kilogram is a trial size, not a commitment to a drum. A pilot that needs 3 kg can take three pouches. A production plan that needs 300 kg should be built around drums, pallets and the lead time together.
Packaging
| Pack | Net content | Use | Watch |
|---|---|---|---|
| Foil pouch | 1 kg | Bench and pilot trials, samples | Reseal after opening; high headspace |
| Fiber drum with liner | 25 kg | Production | Liner is the moisture barrier |
| Agglomerated or instantized isolate | 1 kg pouch or 25 kg drum | Formats that need faster wetting | Made to order; confirm the mesh and bulk density |
A foil laminate with a resealable closure makes the pouch, and the moisture barrier is built into that laminate. The drum is fiberboard, protected by an inner liner; if the liner has been slit and rolled back, the powder is exposed no matter how firmly the lid sits. Both formats carry the grade, lot code, net weight, storage instruction and soy allergen statement.
Pack choice is part of the stability case, not an afterthought. A 5 kg bag kept in a humid room is a different proposition from a sealed 1 kg pouch, so any non-standard size should be named in the specification.
Lead time
The 1–7 day lead time covers stock in the standard pack. The clock starts when the order, the agreed specification and the shipping details are all in place, not when the first message arrives. A purchase order sent before the specification is signed does not start it.
Made-to-order cases take longer: agglomeration or instantizing, a different pack, a document the site does not routinely issue, or a destination outside the standard route. The quotation should say which case applies instead of leaving the buyer to assume the product-page lead time.
What a quotation needs
- Grade and specification revision: soy protein isolate, 80 mesh, with agglomeration or instantizing if needed.
- Protein basis: at least 90.0% on a dry basis, Kjeldahl method, N × 6.25 factor.
- Quantity, pack and whether this is a trial or a production release.
- Destination, Incoterm and delivery address, which determine route and paperwork.
- Documents: COA, specification, SDS, soy allergen statement, and any non-GMO or identity-preserved statement the label needs.
- Required date, plus any carrier or packaging restriction.
A reply that covers only the first three is an opening, not an offer. Most delays between quotation and shipment come from items four to six.
Samples
Ask for material from the lot that will be supplied, with the lot code, the matching COA and the soy allergen statement. A sample without a lot code is a demonstration, not trial stock; it cannot be used for stability work or for a label decision.
Order enough to repeat the trial. A 100 g sachet may show how the powder disperses, but it will not cover a second run plus a retained portion. That is why the 1 kg pouch is the trial format.
Where the terms end
Terms of trade are negotiated in the quotation and the contract; a product page is not the place for them. The supplier controls the release specification, the pack, the document set and the lead time for stock. The buyer owns the destination choice, the label, the post-arrival storage and the use in the finished product.
Two conditions should be agreed before the first order. One is the storage requirement and the re-test date: material kept outside the stated condition no longer sits inside the specification. The other is how long a complaint may be raised and what retained sample is available: without a sample, a complaint cannot be investigated. The quality page explains both.
What the order is measured against is on the COA page; the pack and grade to name are on the grade comparison; the documents that travel with the drum are on the compliance page. The minimum is defined in the MOQ glossary entry, and the full range is on the soy protein isolate page.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation