02 Grade comparison

Sea cucumber peptide grades: source, peptide cut and particle size

Technical document 02 · Reviewed 2026-11-19 · Sea Cucumber Peptides

On this page
  1. Why one specification still leaves choices
  2. Four practical options
  3. Inside the drum
  4. In the finished product
  5. Writing the specification
  6. When this is not the right material

The catalogue carries one sea cucumber peptide specification, but the material varies by source, by where the peptide cut sits inside the ≥80% below 3,000 Da window, and by particle size. The grade decision is the dosage form, the label and the process, not a higher protein figure. A powder that suits a capsule may be wrong for a clear drink; a granulated powder that flows well may dissolve too slowly in a stick.

In one line

The catalogue has one sea cucumber peptide specification; the grade decision is the source, the particle size and the dosage form, not a different protein percentage.

Why one specification still leaves choices

“Grade” here does not mean a ladder of protein percentages. The catalogue fixes protein at ≥90.0% by Kjeldahl, peptide at ≥80.0% by HPLC, at least 80% below 3,000 Da, ash at ≤5.0% and moisture at ≤7.0%. What remains is the raw material, the shape of the distribution and the physical form.

The source is the first choice. Sea cucumber is a group of species, and one body wall is not the same raw material as another. Single-species material supports a species name and a tighter trace; mixed-species material varies more in colour, ash and amino acid profile. Tissue and wild-caught or farmed origin belong in the same record.

The second choice is the peptide cut. The gate is a minimum: at least 80% below 3,000 Da. A tighter cut dissolves faster and can be clearer in a drink, but it raises the free amino acid fraction and can change taste and odour. A looser cut inside the same gate is not a different grade, but it behaves differently in a formula.

Four practical options

Four options sit behind the single specification. Only the first two are catalogue formats; the others are development briefs that must be written into the specification and label.

Practical sea cucumber peptide options
OptionWhat changesCatalogue statusTypical use
Standard 80 mesh powder≥95% through 80 mesh; fast wetting; dust when pouredCatalogue formatCapsules, sticks, drink mixes
Granulated powderFlow, dust, bulk density and wetting rateOn requestTablets and high-speed filling
Tighter peptide cutMore mass below 3,000 Da; faster dissolution; more free amino acidsDevelopment briefClear drinks and fast-dissolving sticks
Diluted premixCarrier lowers protein and peptide per gram; label changesCustomer-specificLow-dose formats and flavour systems

A tighter cut is not automatically better. More hydrolysis means more small peptides and free amino acids, which can taste less neutral, raise a drink's osmolality and reduce yield. The right cut is the one the dosage form and the sensory target can carry.

Inside the drum

The physical targets are narrow enough to test and wide enough for raw-material variation. Appearance is off-white to light tan; colour moves with species, season and dryer, and a shift inside that window is not an identity failure. Solubility is the more useful line: the powder gives a clear to slightly opalescent solution, and haze at the target concentration is a formula question.

Physical targets and what they decide
AttributeTargetWhat it decides
AppearanceOff-white to light tan powderColour consistency, not identity
SolubilityClear to slightly opalescent in waterClarity in sticks and drinks
Moisture≤7.0%Caking and shelf life
Ash≤5.0%Taste, haze and mineral load
Particle size≥95% through 80 meshWetting, flow and dust

Odour is not in the table because it is hard to certificate, but it belongs in the trial. The marine note strengthens with moisture and storage temperature. A capsule can mask it; a stick pack or a clear drink cannot. Ask for a sensory check on the lot.

The 5.0% ash limit is wider than the 2.0% limit on fish collagen peptides. A sea cucumber lot near the limit can haze a clear beverage or taste saltier, and ash moves most when the raw material changes. For a clear drink, write a tighter internal target than the catalogue gate.

In the finished product

In a capsule or tablet, the powder is judged by flow, bulk density and compressibility. The 80 mesh powder fills well; a granulated form flows faster and makes less dust. Tablets usually need granulation, and the granulating liquid adds a moisture step the stability file has to cover. The hygroscopic powder also competes with the shell and the excipients for water.

In a stick pack or drink mix, the questions are wetting, dissolution and taste. The 80 mesh powder wets quickly, but a high-molecular-weight shoulder can leave haze or sediment. The marine note is more exposed in a drink than in a capsule, so the flavour system has to be tested against the actual lot. A granulated form may dissolve more slowly, the wrong trade in a stick.

In a gummy or chew, the powder competes with the base for water, and reducing sugars can brown with the peptide during processing and storage. That is a matrix question, not a grade question, but particle size and moisture change the answer. A bench trial at the real process temperature is the only way to see it.

Writing the specification

A specification that can be bought against names the choice, not only the product. The lines below are the minimum; each one has to be written into the purchase specification and, where it appears on the pack, into the label.

  • “Sea cucumber peptides; species, tissue and origin named on the certificate.”
  • “Protein ≥90.0% by Kjeldahl; nitrogen factor and basis printed on the COA.”
  • “Peptide content ≥80.0% by HPLC; method and integration cut-off named.”
  • “At least 80% of the mass below 3,000 Da; full distribution reported.”
  • “Moisture ≤7.0%; ash ≤5.0%; appearance off-white to light tan.”
  • “Particle size ≥95% through 80 mesh; granulated on request.”
  • “Heavy metals and microbiology as listed; allergen and source statements on file.”

A purchase order that says “sea cucumber peptide 90%” has not chosen the species, the peptide cut, the particle size or the source. Those lines decide whether the powder works in the dosage form.

When this is not the right material

If the label needs collagen, this material is the wrong choice on the word alone. The sea cucumber specification does not set a hydroxyproline figure, so a “collagen peptides” claim needs separate characterisation. Fish collagen carries hydroxyproline at 8.0–12.0% and a named fish source, the cleaner route for a collagen claim, though the fish allergen comes too.

If a clear beverage needs more ash margin, fish collagen at ≤2.0% ash is easier, or the sea cucumber specification has to be tightened. If the project needs a marine peptide that is not fish, sea cucumber is the candidate, but the allergen and cross-contact file still has to be checked. The sea cucumber versus fish collagen comparison sets out the marker and label differences.

The product hub carries the catalogue ranges; the COA page explains how the protein and peptide figures are read; the MOQ page covers packs and lead time; the fish collagen product page and the collagen peptides page show the alternative. The analytical methods library explains the HPLC work, and the quality page describes the release file.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation