What the COA for rice protein actually contains
The certificate for a rice protein lot reports protein by Kjeldahl, the nitrogen factor applied to it, moisture, ash, appearance, identification, microbiology, the heavy-metal panel and particle size. The protein line is a calculation rather than a direct measurement, so the factor and the basis have to be printed beside it. The figures in the first table belong to the catalog specification; the batch COA speaks for one pack.
A rice protein certificate is only complete when the Kjeldahl figure carries its nitrogen factor and its basis, with moisture, ash and arsenic reported beside it.
Reading the certificate line by line
Work down the sheet and ask three questions of every line: what was measured, how it was measured, and which limit it was released against. A row that reads only “conforms” leaves the reader with a verdict and no evidence.
Two rows carry more weight for this material than the rest. The protein row matters because the number is calculated, and the arsenic row matters because rice takes up inorganic arsenic from the paddy soil. Both should be explicit, not folded into a general contaminants line.
| Parameter | Method | Release limit |
|---|---|---|
| Appearance | Visual | Off-white to light tan powder |
| Identification | Amino acid profile against a reference | Protein profile conform |
| Protein | Kjeldahl, with the stated factor | ≥80.0% (factor and basis stated) |
| Moisture | Gravimetric, vacuum oven | ≤7.0% |
| Ash | Gravimetric, muffle furnace | ≤3.0% |
| Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg |
| Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent |
| Particle size | Sieve analysis | ≥95% through 80 mesh |
The nitrogen factor and the basis
Protein is not measured directly. The laboratory measures nitrogen, and the protein figure is nitrogen multiplied by a conversion factor. For rice, the cereal factor is 5.95; the general food-labelling factor is 6.25. The same nitrogen result therefore produces two different declarations: a nitrogen content of 12.8% reads 80.0% with 6.25 and 76.2% with 5.95. Neither number is wrong; they answer different questions. The certificate has to say which one it used.
The basis is a second variable. “80.0%” without a basis is ambiguous between as-is and dry weight. A lot at 80.0% as-is with 7.0% moisture is 86.0% on the dry basis; at 5.0% moisture the same as-is figure is 84.2% dry. A buyer comparing two quotations on the dry basis and receiving one on the as-is basis will see a difference that no process change explains.
Moisture and ash sit beside the protein because all three add up. A lot at 80% protein, 7% moisture and 3% ash leaves about 10% for fat, carbohydrate and fiber, and a high ash result means mineral material is taking mass that the protein figure assumes. The three lines should be read together, not one at a time.
Release limit versus batch result
A release limit is the boundary the lot had to meet; the batch result is what the laboratory actually found. Keep the two in separate columns and name the method. A results column that repeats the specification range has told the reader nothing about the lot.
| Parameter | Limit | What the result column shows |
|---|---|---|
| Protein | ≥80.0% with the factor and basis named | The measured figure, plus factor and basis |
| Moisture | ≤7.0% | The measured percentage |
| Ash | ≤3.0% | The measured percentage |
| Heavy metals | Per element | A measured value for each element, arsenic included |
| Particle size | ≥95% through 80 mesh | The measured percentage through the sieve |
The word “passes” only means something if the reader can rebuild it from the figures printed beside it. Microbiology is evidenced by a count and an absence statement, and heavy metals by a number for each element. A certificate that reports one combined total for heavy metals has concealed the element a rice-derived material is most likely to carry.
What moves between batches
Rice protein moves with the source before it moves with the process. Brown rice, white rice and broken rice give different ash, fiber and colour, and the bran fraction carries more of the inorganic arsenic. A change of rice supply can move the arsenic result without any change in the extraction line.
Starch removal moves the protein figure. A less complete starch removal leaves carbohydrate that dilutes the protein and raises the bulk for the same protein dose. Drying and spray-drying move the moisture, the bulk density and the colour; sieving moves the particle-size result. The 80 mesh figure describes the finish, not the chemistry; a new mill or sieve can move it while everything else stays put.
Colour is a wide window, off-white to light tan, and a move within it does not mean the lot is a different material. A batch that is markedly darker can point to a hotter drying step or to browning between residual sugars and protein, even when the assay passes. Watch the direction across lots: a protein figure drifting down or a moisture figure drifting up is a process signal, while one result close to a limit is only one data point. The lot code should tie the certificate to the pack, the drum and the retained sample.
When an outside test earns its place
Commission an outside laboratory for a new rice supplier, a first entry into a regulated market, an organic claim or a disputed protein figure. Do not ask it to repeat the supplier's certificate; ask it to answer the open questions. The panel that does that is Kjeldahl with Dumas as a cross-check, an explicit factor, an amino acid profile by HPLC, ICP-MS with arsenic and cadmium reported separately, a starch or total-carbohydrate result, and microbiology.
Add a melamine screen if the nitrogen figure looks inconsistent with the amino acid profile, and a soy or wheat ELISA where a shared line is possible. Rice DNA is partly degraded by extraction and spray drying, so a negative rice PCR result is weaker evidence than a positive one; the shared-line record and the cleaning validation carry the rest. Require a detection limit beside every screen, and keep the tested sample against the retained sample.
What to compare between suppliers
Compare six items: rice source and grade; nitrogen factor and basis; protein, moisture and ash; amino acid profile; arsenic and cadmium; mesh and pack. An 80% figure on two quotations can hide a different factor and a different rice source, which means the two powders are not equivalent.
Catalog limits are published on the rice protein page. Grades are compared on the grades page, the identity tests are on the identity page, the Kjeldahl method is in the methods library, and the quality page explains how a lot is released.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation