What the COA for oat protein actually contains
An oat protein COA is a report on a specific lot, not a restatement of the catalog range. It carries the nitrogen method and the 5.83 factor, the dry-matter basis, the fat, fibre, ash and moisture that fill out the powder, and the identity, metal, micro and mesh lines. The limits below are the catalog gates; the measured results belong in their own column on the lot certificate.
The protein figure is a calculation: the nitrogen, the oat factor and the dry basis have to be stated together before the percentage means anything.
The certificate as a test report
The useful test of a certificate is whether a stranger could audit a row. Three elements make that possible: the parameter, the method behind the value, and the release limit. A row that stops at “conforms” withholds the evidence and asks for trust instead.
The identity line should distinguish oat protein from any other protein. A protein profile — an amino acid pattern by ion-exchange chromatography, or an electrophoretic band pattern — compared against an oat reference does that. The certificate should identify the reference and the method, not only the conclusion.
| Test | Method | Limit |
|---|---|---|
| Identification | Protein profile against an oat reference | Conforms |
| Protein, dry basis | Kjeldahl nitrogen × 5.83 | ≥70.0% |
| Fat | Solvent extraction | ≤8.0% |
| Fibre | Enzymatic-gravimetric | ≤5.0% |
| Ash | Gravimetric, ashed | ≤3.0% |
| Moisture | Loss on drying | ≤7.0% |
| Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg |
| Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent |
| Particle size | Sieve analysis | ≥95% through 80 mesh |
Dry basis, nitrogen and the oat factor
Oat protein is quoted on a dry basis with nitrogen multiplied by 5.83. Nitrogen is measured on the sample as received and converted to dry matter. Twelve per cent nitrogen gives 69.96%, reported as 70.0%, and the same nitrogen at 6.25 gives 75.0%. With 7.0% moisture, that dry-basis 70.0% is 65.1% in the powder as weighed.
Demand the factor, the moisture and the basis together. A percentage on its own cannot be recalculated, and a label calculated at 6.25 will disagree with a certificate calculated at 5.83 even when both describe the same drum. Kjeldahl and Dumas are both nitrogen methods; which one was used is part of the method line.
The rest of the powder is not protein. Fat, fibre, ash and water make up the balance, and two 70% concentrates from different oat streams can carry very different amounts of each. The protein number is the headline, not the whole specification.
Release limit versus batch result
On a lot certificate, each limit needs a measured value next to it. A result column that repeats the specification has measured nothing, and a single “pass” cannot be audited. The table sets out what the result column should show.
| Parameter | Limit | Expected result |
|---|---|---|
| Protein | ≥70.0% dry basis, N × 5.83 | The measured percentage, with the factor and the moisture |
| Fat | ≤8.0% | A measured percentage |
| Fibre | ≤5.0% | A measured percentage |
| Moisture | ≤7.0% | A measured percentage |
| Heavy metals | Per element | A measured figure in mg/kg for each element |
| Microbiology | Counts and absence | The count and the absence statement for the lot |
Microbiology needs a count plus an absence statement. Metals need one figure per element; a total hides cadmium, the element that matters most in an oat-derived powder. Where a result sits close to the gate, the method and its detection limit should appear beside it.
What moves between batches
Four variables explain most lot-to-lot movement: the oat source, how much starch and fibre were removed, the heat treatment and the milling. Protein, fat and fibre follow the source and the separation; moisture and mesh follow drying and milling. A different oat variety can move the fibre line without any change in the plant.
Colour should not decide a rejection by itself. The window runs from off-white to light tan, and heat treatment or a finer grind can darken the powder within it. A colour shift is a reason to ask about the process, not proof of a substitution.
Read the trend across lots rather than one certificate: protein near the 70.0% gate, fat or fibre climbing, moisture close to 7.0%. Keep the lot code consistent from certificate to pouch, drum and retain.
When to order an outside test
Outside testing is worth ordering for a new source, a regulated destination, a gluten-free or protein claim, or a disputed result. A focused panel beats a full repeat: nitrogen by Kjeldahl or Dumas, an amino acid profile, an R5 gluten ELISA, light microscopy for starch and fibre, ICP-MS for the metals, and a micro count.
Every “not detected” needs a detection limit. For gluten, a method that cannot see below 10 mg/kg leaves little margin under a 20 mg/kg claim. For cadmium, the quantification limit should sit well under the catalog gate.
Keep the chain short. Testing should use the retain, and the report should name the lot. In a dispute, give the referee the retain, the supplier’s COA and the specification, and ask for tests that separate oat protein from another protein or a dilution, not another nitrogen result.
Comparing two suppliers
Six lines carry the comparison: protein with factor and basis; fat, fibre and ash; moisture; gluten and allergen statement; metals and microbiology; pack and lot code. Two quotations that both say 70% but differ on fibre or factor describe different powders.
Then look at the process record: who made the lot, which oat stream, whether the flour was heat-treated, and which mill and sieve were used. The catalog range sits on the oat protein page. The identity page shows how oat is separated from another protein; the compliance page sets out the gluten and allergen position; the methods library covers the protein tests; the quality page follows a lot from release to dispatch. The whey protein concentrate page is the animal-protein reference.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation