Fluid, deoiled or high-oleic: choosing a sunflower lecithin grade
Sunflower lecithin is bought by three choices at once: the form (fluid or powder), the seed type behind the fatty acid profile, and the phospholipid figure on the certificate. The catalog grade carries ≥60.0% phospholipids and ≥60.0% acetone-insoluble matter and is supplied as a powder, with the fluid form available on request. Each choice changes the mass on the label, and the seed type also changes the source record in the buyer's file.
The grade is fixed by the phospholipid figure, the form and the seed type; a change in any one of them moves the dose weight and the handling, and a change of seed moves the source record.
Why the range exists
Three forces shape the range. Oil content comes first: a fluid lecithin keeps much of the sunflower oil, whereas a deoiled powder is mostly phosphatide. Handling comes second: a capsule line needs a free-flowing powder, and an oil blend can take a viscous fluid. The third is the seed itself, since standard sunflower is linoleic-rich and a high-oleic crop gives a different fatty acid profile and a more oxidation-resistant oil fraction.
Organic certification cuts across all three. It is a chain-of-custody grade, not a chemical one: the lecithin, the carrier and the processing aids all have to sit inside the certified system. The catalog grade is the conventional 60% material in powder form; the fluid and the specialty grades are quoted as separate lines.
“Lecithin” alone does not identify a grade. Write the source, the figure, the form and, where a claim depends on it, the seed type before asking for a quotation.
Fluid, deoiled, carrier-supported and modified
| Form | Acetone-insoluble matter | Physical state | Where it is used | What follows the choice |
|---|---|---|---|---|
| Fluid sunflower lecithin | About 60–65% | Viscous, amber | Emulsifier, oil blends | More grams per gram of phospholipid |
| Deoiled sunflower powder | ≥95% | Free-flowing powder | Capsules, dry blends | Less oil; more phospholipid per gram |
| Carrier-supported powder | Carrier plus 50–70% lecithin; AI lower | Free-flowing powder | Sticks, blends | Carrier is declared; AI is read on the powder |
| Hydrolysed lecithin | ≥56.0% | More hydrophilic fluid or powder | Instant powders, emulsions | Higher acid value; separate additive limits |
| High-oleic grade | Same AI band | Fluid or powder | Blends where oxidation matters | Different fatty acid profile; check it on the certificate |
| Organic grade | Same AI band | Fluid or powder | Certified products | Certified chain, carrier and processing aids |
The catalog grade is the 60% band, quoted as a powder or a fluid. Within that band a powder may be deoiled, which pushes the AI figure far above 60%, or built on a carrier, in which case the carrier is declared and the AI is read on the finished powder. The certificate and the carrier declaration are what tell the two apart.
Hydrolysed lecithin is a separate process form: the enzyme step raises the acid value and improves water dispersibility, and the EU additive specification gives it an AI minimum of 56.0% with an acid-value ceiling of 45. High-oleic and organic are choices about the seed and the chain rather than the process, and neither is visible in the acetone-insoluble figure alone.
Handling the powder and the fluid
A fluid grade moves slowly when cold, so it is usually warmed before transfer. Heat has a cost: colour darkens and hydrolysis speeds up, which is why the heater setting and the time should be logged. A powder picks up water, dusts and cakes in a humid store; it disperses in water but never forms a clear solution.
Flow is not a cosmetic property. A deoiled powder and a carrier-supported powder can pass the same mesh and still differ in bulk density, and a hopper that feeds one may bridge on the other. Put bulk density and flow on the specification for a powder, and say whether the figure is measured on the powder or on the lecithin itself.
Both forms dislike heat. A powder that has sat warm may still flow freely and still show a higher acid value than the release certificate, because hydrolysis does not change the look of the powder.
Dose arithmetic for each grade
Begin with what the label actually declares. If it declares lecithin, the divisor is the mixture weight. If it declares phospholipids, the divisor is the phosphatide fraction. If it declares PC, the divisor is that one class. Three claims, three denominators.
A worked example makes the arithmetic concrete. If the label claims 250 mg phospholipids, a 60% powder supplies it in about 417 mg, a 70% grade in about 357 mg and a 95% deoiled powder in about 263 mg. For a 100 mg PC claim, a lot at 25% PC needs about 400 mg of lecithin, while a 90% PC fraction needs about 111 mg. Those are worked examples, not catalog figures; the certificate supplies the divisor.
A carrier changes the arithmetic once more. The lecithin share of a carrier-supported powder and its AI figure are two different percentages, and the label has to state which one the dose is built on. Nor is the AI figure a PC figure: a powder sold as “60% lecithin” is not a 60% PC ingredient.
Writing the grade specification
Write six blocks into the grade specification: identity (sunflower lecithin, Helianthus annuus, CAS 8002-43-5, E322 grade where the additive route applies); composition (AI, phospholipids with the factor, class profile); condition (moisture, acid value, peroxide value); contaminants (metals, microbiology, residual solvent); labelling (source statement, non-GMO statement, organic certificate where claimed, carrier); and the physical form with particle size and bulk density for a powder.
Name the method and the basis next to each number, and do not carry a fluid limit across to a powder. The COA page shows where each result belongs; the identity page shows the source checks.
When another material is the right purchase
A soy-based formula with no allergen constraint can use soy lecithin, which is the established material for that route; the two sources are different products, not interchangeable grades. A PC claim above what lecithin carries needs a PC fraction, not more lecithin. A clear solution needs a different ingredient, because lecithin disperses and clouds.
A soy-free label is not solved by a grade change on this page. It needs the source record and the line statement described on the sunflower versus soy comparison. The product page lists the catalog grade; the MOQ page lists the packs; the stability page covers storage for each form; the methods library describes the assays; release is explained on the quality page.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation