01 COA & batch testing

What the COA for safflower seed oil actually contains

Technical document 01 · Reviewed 2026-11-19 · Safflower Seed Oil

On this page
  1. The certificate as a test report
  2. The basis behind each number
  3. Release limit versus batch result
  4. What moves between batches
  5. When to order an outside test
  6. What to compare between suppliers

A safflower seed oil certificate reports the appearance, the fatty acid profile by gas chromatography, the free fatty acid value, the peroxide value, the moisture, the heavy-metal panel and the microbiology. Each line should carry its method, its release limit and the measured result for the lot. The profile names the oil and its grade; the free fatty acid and peroxide values describe how far the oil has moved from the fresh, refined state.

In one line

A safflower COA is a fatty acid profile, an acidity figure and an oxidation figure on the same lot; a certificate that reports only one of the three does not describe the oil.

The certificate as a test report

A certificate is read line by line, not as a pass stamp. For each parameter the buyer needs the method that produced the number, the release limit the lot was judged against, and the measured result. A row that says only “conforms” asks for trust without evidence.

The profile row decides whether the lot is the ordered grade. Safflower is sold as a high-linoleic oil or as a high-oleic oil, and the two have different specifications. A certificate that reports “safflower oil” and a linoleic figure without the oleic, palmitic and stearic results has not shown which grade it is.

Typical release lines for refined safflower seed oil
ParameterMethodRelease limit
AppearanceVisualClear to slightly hazy, pale yellow oil
IdentificationGC of fatty acid methyl esters against reference standardsFull profile matches the declared grade
Linoleic acid (C18:2)GC, area % of FAME70.0–80.0%
Oleic acid (C18:1)GC, area % of FAME10.0–20.0%
Free fatty acid, as oleic acidTitrimetric (AOCS Ca 5a-40 or ISO 660)≤0.50%
Peroxide valueIodometric titration (AOCS Cd 8b-90 or ISO 3960)≤5.0 meq O₂/kg
MoistureKarl Fischer titration≤0.1%
Heavy metalsICP-MSPb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg
MicrobiologyPlate count and absence testsAPC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent

The basis behind each number

The fatty acid result is reported on the GC basis. The laboratory converts the oil to methyl esters, separates them on a capillary column and reports each peak as an area percentage of the total FAME. That is not a weight percentage of the oil, because the flame-ionisation response differs between fatty acids. The catalog range is written on the GC basis, and the certificate should say so. A label that needs a weight figure needs the calculation, not a relabelled area percentage.

The free fatty acid value is expressed as oleic acid. “0.30%” without that basis is ambiguous, because the same titration would be a different number expressed as lauric or palmitic acid. Safflower is normally quoted as oleic, and the certificate should print the basis beside the value.

The peroxide value is an iodometric measure of hydroperoxides, reported in milliequivalents of oxygen per kilogram of oil. It rises as the oil oxidises, but it is not a complete oxidation history: hydroperoxides break down into aldehydes, so a PV can fall again in a badly oxidised oil. The p-anisidine value measures those secondary products. It is not on this catalog specification, but it is the companion test when a lot smells old while the PV is still inside its limit.

Moisture is measured by Karl Fischer titration and limited to ≤0.1%. That is tight. A result near the limit points to a wet process or a pack that has taken up water; it raises the risk of hydrolysis, which later shows as a rising free fatty acid value.

Release limit versus batch result

The release limit is the boundary for the lot; the batch result is what the laboratory measured. Both belong on the page, in separate columns, with the method beside them. A result column filled with the specification range is a copy of the gate, not a result.

What the result column should contain
ParameterRelease limitResult column
Linoleic acid70.0–80.0%A measured area %, with the column and the standard named
Free fatty acid≤0.50% as oleicA measured percentage, with the titration basis
Peroxide value≤5.0 meq O₂/kgA measured figure for the lot
Moisture≤0.1%A measured percentage by Karl Fischer
Heavy metalsPer elementA figure in mg/kg for each element, not a total
MicrobiologyCounts and absenceThe count and the absence statement for the lot

“Passes specification” is a conclusion. The reader should reach it from the numbers. For heavy metals the evidence is a figure per element; a single “heavy metals <10 mg/kg” line hides the element and its limit.

What moves between batches

The profile moves with the cultivar, the season and the origin. A lot at 71% linoleic and a lot at 79% are both inside the catalog range and behave differently in a blend. Refining moves the free fatty acid, colour and peroxide value; storage moves the peroxide value and free fatty acid again.

Colour is the least quantitative line. Refined safflower is pale yellow; a darker oil can point to a bleaching problem, a hot hold or early oxidation while the assay still passes. Ask for the peroxide and p-anisidine values rather than rejecting on colour.

A grade swap is not a batch variation. If the oleic result moves from 15% to 70% and the linoleic result moves the other way, the lot is a different grade, whatever the label says. The lot code on the certificate should match the bottle, the drum and the retained sample.

When to order an outside test

Order an independent test for a new source, a first shipment into a regulated market, a grade that the supplier's certificate does not show in full, or a disputed result. The useful panel is not a repeat of every line. It is the full FAME profile with the chromatogram, free fatty acid, peroxide and p-anisidine values, moisture, sterols and ICP-MS for heavy metals.

Ask for the detection limit behind each screen; a “not detected” line without a limit describes the method, not the sample. The sample tested should be the retained sample, and the report should identify the lot. When a result is contested, give the referee the retained sample, the certificate and the specification, and ask for tests that separate grade and source rather than a repeat of the linoleic figure.

What to compare between suppliers

Compare seven lines: the grade and full profile; the GC basis; the free fatty acid basis; the peroxide method; moisture; heavy metals and microbiology; the pack, lot code and retest period. Two quotations that agree on linoleic acid but differ on oleic acid or the GC basis are not describing the same oil.

The second layer is traceability. The certificate should say who refined the lot, which grade was produced and which pack was filled. The catalog specification sits on the safflower seed oil page. The tests that separate safflower from other oils are on the identity page; the grade fork is on the grades page; the GC method is described in the analytical methods section; the release workflow is on the quality page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation