05 Compliance

The regulatory file for pumpkin seed oil

Technical document 05 · Reviewed 2026-11-19 · Pumpkin Seed Oil

On this page
  1. What a reviewer needs to see
  2. European Union
  3. United States
  4. United Kingdom
  5. Catalog limits and market limits
  6. Claims and process wording
  7. Documents to keep with the lot
  8. Before the first order

Pumpkin seed oil is pressed from Cucurbita pepo seeds (CAS 8016-49-9) and enters the market as a food oil, or as an ingredient in a supplement. Whether a particular finished product may be sold, and with what wording, is a question for the destination's rules and the buyer's regulatory team. What we can supply is the material file: the grade, the lot data, the contaminant results and the process statements that a review needs.

In one line

The oil is a food ingredient; the file has to show the grade, the contaminants, the label and the route for the destination.

What a reviewer needs to see

A reviewer usually works through four things: the identity and specification of the material, the evidence for the lot, the limits and labelling rules for the market, and the change-control story if the source or process moves. Our part is the first two plus the supporting statements; the destination route is the buyer's call, made with the current text in hand.

Paperwork is only useful if it is current and specific. A specification without a version, a COA without a lot code, or an allergen statement copied from another product will not survive a review. Keep the document set short, dated and tied to the material that is actually shipping.

European Union

EU practice regards pumpkin seed oil as a traditional food oil rather than a new ingredient, but the buyer should confirm that position for the material and the intended intake. Supplements are covered by Directive 2002/46/EC, which harmonises vitamins and minerals; plant oils fall outside those lists and are dealt with under national supplement rules, so the member state of sale matters.

Labelling is governed by Regulation (EU) No 1169/2011. Contaminants are governed by Regulation (EU) 2023/915, which sets limits for lead, cadmium and mercury in supplements and separate limits for oils and fats. For oils intended for direct consumption, the current limits are 2 µg/kg for benzo[a]pyrene and 10 µg/kg for PAH4 as of this review; the consolidated text should be checked before release. Refined oils also carry 3-MCPD and glycidyl-ester limits, which do not apply to a cold-pressed oil that has not been deodorised. Health claims fall under Regulation (EC) No 1924/2006 and must match an entry in the register.

United States

A food use and a supplement use take different routes. As a supplement ingredient, the oil is handled under DSHEA, the manufacturing site follows the dietary-supplement cGMP in 21 CFR 111, and the label uses the Supplement Facts format in 21 CFR 101.36. As a food ingredient, the food-labelling rules apply instead. The buyer's regulatory team decides which route the finished product takes.

A structure/function statement requires substantiation and a notification to the FDA within 30 days of marketing, under 21 CFR 101.93; a disease-related claim is not allowed. Federal rules do not set a heavy-metal ceiling for supplements, so state law can become the binding limit; California's Proposition 65 is the one most often encountered, and a lot that passes the EU panel may still need a Prop 65 review.

United Kingdom

Great Britain maintains its own supplement regime. The Food Supplements (England) Regulations 2003, with the Scottish and Welsh equivalents, provide the base, and the GB labelling and claims rules apply as they stand. Pumpkin seed oil is not one of the harmonised vitamins or minerals, so the national position for the product should be checked. Northern Ireland operates under the EU framework through the Windsor Framework, which means a UK-wide launch can face two sets of rules.

Catalog limits and market limits

The values in the specification are commercial release limits, not legal maxima. They are set so that a normal lot has room to meet the destination rules after the finished-product calculation.

Specification limits and the evidence a market file should carry
ParameterSpecificationEvidence to hold
Free fatty acid≤0.50%Lot result and method; quality parameter
Peroxide value≤5.0 meq O₂/kgLot result with test date; p-AV if requested
Moisture≤0.1%Lot result; quality parameter
Lead (Pb)≤3 mg/kgLot result; finished-product calculation
Cadmium (Cd)≤1 mg/kgLot result; applicable food category
Mercury (Hg)≤0.1 mg/kgLot result and method
Arsenic (As)≤2 mg/kgLot result; agreed limit
PAH4Not specifiedBaP and PAH4 by a named method, with LOQ
PesticidesNot specifiedSeed-source residue screen, with LOQ

The heavy-metal lines follow the supplement limits used in the EU; the destination text and the daily dose can make the effective limit tighter. PAH and pesticide results are absent from the catalog because they depend on how the seed was grown and dried. A cold-pressed oil can carry PAHs from combustion gases used in drying even when the fatty acid profile and the metals are clean.

Claims and process wording

None of the markets discussed here allows a disease-related claim. A statement about omega-6 or essential fatty acids is a nutrition claim and must satisfy the authorised wording and its conditions; in the EU those conditions include amounts per 100 g and per 100 kcal, so the finished product has to be checked, not only the oil. “Cold-pressed” is a process description, not a health claim, and it needs a process record behind it.

This page does not reproduce claim text and makes no claim for the oil. A draft label passes the review only when each sentence can be traced to a register entry or a notified statement, with the amount and population that the rule requires. The brand's reviewer signs the label; a COA cannot do that job.

Documents to keep with the lot

Records that support a pumpkin seed oil market file
RecordContentPurpose
Certificate of analysisResults, methods, limits, lot code and siteLot release and traceability
Specification and TDSProfile, FFA, PV, moisture, pack and storageThe agreed material
Safety data sheetHandling, storage and hazardsSite and transport
Source statementSpecies, plant part and originIdentity and labelling
Cold-press recordPressing temperature; no refiningProcess wording
Contaminant fileMetals, PAH and pesticides, with LOQsMarket limits
Allergen and GMO positionsFor the oil and the finished productLabel review

Before the first order

  • The specification version, CAS number and grade are written down.
  • The COA matches the lot and the pack that will ship.
  • Source, allergen, GMO and process statements are current.
  • Metals, PAH and pesticides are calculated on the finished dose.
  • The label and any claim have been reviewed for the destination.
  • Change control covers the seed source, the press and the pack.
  • The quotation and the specification cite the same revision.

The catalog specification is on the pumpkin seed oil product page; the lot certificate is explained on the COA page; the analytical evidence is on the identity page. The quality page covers lot release, the EU regulatory library holds the framework notes, and the methods index explains the tests.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation