04 MOQ & ordering

Flaxseed oil powder: MOQ, packaging and ordering

Technical document 04 · Reviewed 2026-11-19 · Flaxseed Oil Powder

On this page
  1. Why the minimum is 1 kg
  2. Packs and formats
  3. Lead time and what starts it
  4. Six details a quotation needs
  5. Samples and the retained sample
  6. Terms that belong in the order

The minimum order is 1 kg, supplied in a foil pouch from a released production lot. That unit is enough for a bench trial, a pilot batch and a retained sample, and it travels with the same lot number, COA and document pack as the 25 kg drum. Larger orders change the pack, not the specification.

In one line

One kilogram from a released lot is the qualification unit; the pack, the destination and the document set shape the order around it.

Why the minimum is 1 kg

A formulator does not need a drum to find out whether a powder disperses, tastes acceptable or compresses. A 1 kg pack covers a bench trial at 50–100 g, a small pilot at a few hundred grams and a retained sample for the file. Below that size the pack stops being a lot sample and becomes a hand-prepared portion, which is a different quality question.

The 1 kg pack is drawn from a released lot rather than made as a separate batch. The lot number on the pouch is the lot number on the COA, so the ALA, PV, p-AV, moisture and micro results describe the material in the bag. A sample prepared outside the production record cannot be traced.

Scale-up has one trap. A trial on lot A qualifies the material and the process, not lot B. The 25 kg drum carries its own COA, and its ALA and oxidation values sit somewhere inside the specification rather than at the trial lot's point. Re-read the COA on every production lot.

Packs and formats

Pack options for flaxseed oil powder and what each one is for
PackNet weightTypical useWhat to confirm
Foil pouch1 kgTrial, pilot, retained sampleLot code and COA match the pouch
Fiber drum25 kgProduction runsInner liner, seal and drum condition on arrival
Higher oil loadQuoted per specificationCompact dose formsOil load and ALA are re-set, not assumed
Agglomerated gradeQuoted per specificationTabletting and dust controlMesh, flow and compaction data for the new grade

The 1 kg pouch and the 25 kg drum are the catalog packs. The two on-request formats are different specifications, not different bags: a higher oil load changes the ALA figure on the powder and the free-oil level at the surface, and an agglomerated grade changes the mesh and the flow. Each is quoted with its own specification and its own stability file.

Pack integrity is part of the product. The foil pouch is the barrier that keeps the powder inside its oxidation limits, so a punctured or badly resealed pouch is a quality event, not a packaging inconvenience. On arrival, check the seal, the lot label and the drum liner.

Lead time and what starts it

The catalog grade ships in 1–7 days from released stock. The clock starts when the order and the specification are agreed, not when the enquiry arrives: the oil load, the ALA limit, the pack, the destination and the document set all have to be fixed before the lot can be allocated and the papers prepared.

Two things move a line outside that window. A non-catalog specification — a different oil load, an agglomerated grade, a different carrier or an added antioxidant — has to be manufactured and released, so it is quoted with its own lead time. A destination that needs legalisation, a specific courier or a cold-chain segment adds time that is not visible from the warehouse. The quotation states the lead time for the actual order, and the order confirmation repeats it.

Document preparation runs in parallel with picking. A COA, a TDS, an SDS and a source statement are normally ready with the lot; a customer-specific declaration or a legalised certificate is not, and it should be requested before the order is placed.

Six details a quotation needs

Six details that make two flaxseed oil powder quotations comparable
DetailWhat to stateWhy it changes the quote
Product and oil load50% oil powder, or the load you needThe load sets the ALA on the powder and the mass per dose
ALA limit and basis≥22.5% on the powder by GC, or a tighter limitA tighter limit changes the lot selection
Quantity and pack1 kg, 25 kg or a mix; number of unitsThe pack and the unit count set the handling
Destination and IncotermCountry, city, port or door, and the named IncotermFreight, documents and transit time follow
Document setCOA, TDS, SDS, source statement, any customer formExtra declarations take time and review
Non-standard requestAgglomerated, higher load, antioxidant, carrier changeIt is a new specification, not a pack variant

A quotation that gives one number without these six cannot be compared with another. Two offers that both say “flaxseed oil powder 50%” can differ on the ALA limit, the oxidation limits, the carrier, the pack and the documents, and the difference will show up in the trial, not on the quote.

Samples and the retained sample

The 1 kg pack works as the sample. It should come from the same lot as the COA supplied with it, and the lot code should appear on the pouch, the certificate and the packing list. A supplier who offers a “sample lot” that is not part of the production record is offering a different material from the one that will ship.

Keep a retained sample from each lot you use, sealed and labelled with the lot code, the date received and the COA reference. It is the reference for any dispute about colour, odour, flow or oxidation, and it is the first thing a laboratory will ask for. Sample freight and sample size are stated in the quotation, not assumed from the 1 kg minimum.

Terms that belong in the order

The quotation carries the commercial terms, the lot or allocation, the shelf-life date at dispatch and the document list. The purchase order should repeat the specification, not refer to it by name: oil load, ALA limit and basis, carrier, mesh, PV and p-AV limits, pack and quantity. A PO that says “as per previous order” inherits whatever changed in between.

On arrival, store the powder cool, dry and out of direct light, and keep the pouch sealed between uses. Report any damage or discrepancy before the material is opened, and keep the packing list with the retained sample. The specification sits on the flaxseed oil powder product page, the release data on the COA page, the document list on the compliance page and the form choice on the grade page. Shipping terms are described on the logistics page, and the order vocabulary in the MOQ glossary entry.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation