06 Identity & adulteration

How we prove a fish oil lot is the declared omega-3

Technical document 06 · Reviewed 2026-11-19 · Fish Oil Powder

On this page
  1. The four layers
  2. What the GC profile shows
  3. The EPA/DHA ratio as a fingerprint
  4. Why XRD does not identify an oil
  5. Where substitution shows up
  6. How to write the identity into the specification
  7. Five questions for a supplier

A fish oil lot is identified at four levels: the species and source, the omega-3 form, the fatty acid profile by GC, and the carrier and encapsulation. The 10% total is one line in that set; a lot can hit 10% and still be a different oil.

In one line

Identity is the species, the form, the GC profile and the carrier together; the 10% total is the last line to check, not the first.

The four layers

Four identity layers · what each one answers and where the evidence sits
LayerQuestion it answersEvidence
SourceWhich fish, from where?Species and origin statement; traceability record
FormTriglyceride, ethyl ester or re-esterified?Declaration; intact lipid analysis where disputed
ProfileWhich fatty acids, in what proportion?GC-FID fatty acid methyl esters; chromatogram
MatrixWhat carries the oil?Carrier and antioxidant declaration; starch identification

The certificate answers the third layer well and the fourth partly. The first layer lives in the supplier file, and the second is a declaration until someone analyses the intact lipid. The CAS 8002-50-4 entry covers fish oil generally; it does not name the species, so it cannot carry the source layer on its own.

Lot traceability sits across all of them. One lot code has to run through the certificate, the pack label and the sample kept on file, and the manufacturer should be named, not just the trader.

What the GC profile shows

Gas chromatography of fatty acid methyl esters separates the fatty acids by chain length and saturation. The oil is transesterified, the methyl esters are injected onto a capillary column and the flame ionisation detector measures them against a standard. AOAC 991.39 is the usual reference for encapsulated fish oils. The certificate should name the column, the standard and the quantification method.

A profile is more than a total. It should report EPA, DHA and DPA separately, and it should show the other fatty acids that make up the oil: myristic, palmitic, palmitoleic, oleic and the long-chain monounsaturates. Those minor peaks are the fingerprint. A certificate that gives one EPA+DHA number and no chromatogram is asking the buyer to trust the arithmetic.

Methylation also destroys the form. Once the fatty acids are converted to methyl esters, a triglyceride and an ethyl ester of the same composition look identical. The form needs a separate intact lipid analysis, and a certificate that claims to establish it from a FAME run is overstating the method.

The EPA/DHA ratio as a fingerprint

The ratio is not a specification unless the buyer writes one, but it is a fast consistency check. Natural fish oils sit in a recognisable range for their species, and a concentrate can be cut to almost any ratio the seller wants.

What an EPA/DHA pattern suggests before the species file is opened
PatternWhat it suggests
EPA and DHA roughly equalA mixed natural oil, such as sardine or a blended fish oil
EPA around 1.5 times DHAAn anchovy-type oil, the common base for 18/12 grades
DHA far above EPAA DHA concentrate, tuna oil or an algal oil; check the source
Very high total with little DPAA distilled concentrate rather than a natural oil

Read the pattern against the declared species and the declared form. A natural anchovy oil that arrives with a 4:1 ratio is either not natural or not anchovy, and the certificate should explain which.

Why XRD does not identify an oil

X-ray diffraction reads a crystal lattice. Fish oil is a liquid at room temperature and the starch wall is largely amorphous, so a diffraction pattern of the powder says little about the oil. XRD can identify a crystalline carrier, a mineral filler or a crystalline adulterant, and it is a useful screen for those; it is not an identity test for omega-3 fatty acids.

FTIR can produce a fingerprint of the oil and is useful for a quick comparison against a reference, but it does not quantify EPA and DHA. GC remains the method that separates and measures the fatty acids. A certificate that offers XRD as the identity test for fish oil is answering a different question.

Where substitution shows up

Fish oil is a commodity with a wide quality range, and the powder format makes the oil easy to dilute. The common substitutions are another oil, a lower-grade fish oil, an oxidised oil, or a form that is not the one declared.

Substitution patterns and the test that catches them
PatternWhat it looks likeTest that catches it
Vegetable oil addedHigh linoleic or oleic acid; sterol profile changesFull GC profile; sterol analysis
Lower-grade fish oilRatio drifts; DPA and minor peaks changeGC profile against a retained reference
Oxidised oilPV or p-AV high; odour and colour changePV, p-AV and TOTOX on the lot
Ethyl ester sold as triglycerideLabel says triglyceride; intact lipid shows estersHPLC or GC of the intact lipids
Low omega-3 oilMore oil needed to reach 10%; flow and oxidation changeMass balance; oil load on the TDS
Carrier overstatementStarch level or source differs from the declarationStarch identification; formulation audit

Species substitution is harder to prove from a refined oil than from a fillet, because processing removes much of the DNA. The practical control is the supplier's traceability record plus a GC profile that is consistent with the declared species.

How to write the identity into the specification

A specification that says only "fish oil powder 10%" leaves every layer open. Write the source, the form and the matrix into the same document as the assay, so a change to any of them is a specification change.

A workable line reads: fish oil from named species, triglyceride form, microencapsulated on modified starch with a named antioxidant; EPA+DHA ≥10.0% by GC; EPA reported; DHA reported; moisture ≤5.0%; PV ≤5.0 meq/kg; p-AV ≤20.0; at least 95% through 40 mesh; fish allergen declared. Each clause closes one of the four layers, and the certificate then shows which lot met it.

Five questions for a supplier

  1. Which species and fishing origin does the oil come from, and can you trace the lot to the refiner?
  2. Is the oil natural triglyceride, ethyl ester or re-esterified, and where is that stated?
  3. Can you send the GC chromatogram with EPA, DHA and DPA reported separately?
  4. What are the PV, p-AV and TOTOX on this lot, and when was it produced?
  5. What is the carrier, which antioxidant is used, and how is the fish allergen declared?

The answers should agree with the certificate and the pack. A supplier who cannot answer the first question has not established the source; one who cannot answer the second has not established the form. The catalog specification sits on the fish oil powder product page; the certificate lines are on the COA page, the form comparison on the grade page, and the allergen and market rules on the compliance page. The separation method is described in the methods index.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation