Evening primrose, borage or blackcurrant: choosing a GLA source
Evening primrose, borage and blackcurrant are three botanical sources of gamma-linolenic acid, and they are not interchangeable. Evening primrose oil carries about 8–11% GLA, borage about 18–23% and blackcurrant about 14–19%, with different linoleic, oleic and n-3 fractions around it. The source decides the GLA per gram, the powder weight behind a label figure, the ingredient name and the fatty-acid profile on the certificate.
The GLA source sets the oil's fatty-acid profile, the powder weight behind a label figure and the ingredient name, so it is a specification decision before it is a formulation one.
One fatty acid, three oils
GLA is a C18 n-6 fatty acid with three double bonds. It occurs in the seed oils of several plants, at different concentrations and alongside different fatty acids. Evening primrose (Oenothera biennis) is the established source; borage (Borago officinalis) carries the highest GLA fraction of the three; blackcurrant (Ribes nigrum) sits between them and brings alpha-linolenic and stearidonic acids with it.
The powder format adds a second variable. A microencapsulated powder is an oil load in a carrier, usually modified starch. The GLA on the powder is the oil load multiplied by the GLA in the oil. Two powders can both be called “40% oil” and deliver different GLA per gram because the oils differ.
A source change is therefore not a like-for-like substitution. It changes the certificate, the label ingredient name, the fatty-acid profile, the powder weight per serving and possibly the colour and taste. Decide the source before the grade and the pack.
All three oils are used as food-supplement ingredients in the EU, the US and the UK. The label, not the GLA figure, decides how the source is declared: name the oil in the ingredient list, use the INCI name that belongs to it, and check the current novel-food or dietary-ingredient position for the specific oil and process. The allergen statement follows the source and the carrier, not the GLA content.
The three oils side by side
| Source | GLA in oil | Linoleic | Other markers | Label name (INCI) |
|---|---|---|---|---|
| Evening primrose (Oenothera biennis) | 8–11% | 70–75% | Oleic 8–12%; palmitic 5–7% | Oenothera Biennis Oil |
| Borage (Borago officinalis) | 18–23% | 35–40% | Oleic 15–20%; palmitic 10–12% | Borago Officinalis Seed Oil |
| Blackcurrant (Ribes nigrum) | 14–19% | 40–45% | Alpha-linolenic 12–14%; stearidonic 2–4% | Ribes Nigrum Seed Oil |
These are typical ranges, not specifications. Crop, origin, extraction and refining move them; a supplier's certificate should carry the measured profile for the lot, not the table from a brochure.
What changes in the powder
At the same 40% oil load, the GLA on the powder follows the oil: about 3.2–4.4% from evening primrose, 7.2–9.2% from borage and 5.6–7.6% from blackcurrant. The carrier is the other 60%, so the powder weight behind a given GLA figure is set by the source before the formulation is written.
Borage and blackcurrant oils can be darker and stronger-tasting than evening primrose oil; the powder's colour and flavour follow the oil and the carrier. A switch can change the appearance of a stick or the taste of a chewable tablet even when the GLA figure is matched. The oil load, the carrier and the mesh are separate specification lines; a source change does not change them, but it can change the emulsion and the flow.
Oxidation is not a ranking of the sources. The number of double bonds per gram and the natural tocopherol content differ, and the oil's refining history matters more than the name on the label. A borage powder is not automatically more stable than an evening primrose powder; both need PV and p-AV data.
The powder weight behind the label figure
This page uses “dose” in the label sense: the amount of GLA declared per serving, not a health recommendation. The arithmetic is simple. At 40% oil load, 1 g of evening primrose powder carries 32–44 mg GLA, 1 g of borage powder 72–92 mg and 1 g of blackcurrant powder 56–76 mg. To declare 100 mg GLA per serving, the formulator needs about 2.3–3.1 g of evening primrose powder, 1.1–1.4 g of borage powder or 1.3–1.8 g of blackcurrant powder.
Those weights decide the dosage form. A 3 g stick is feasible; a 3 g capsule is not. If the label figure has to sit in a 500 mg capsule, the oil may be the better format, or the source with the higher GLA fraction. The carrier is not inert to the calculation: it adds weight and volume, and it changes the mouthfeel.
| Material | GLA in oil | GLA per gram of powder | Powder for 100 mg GLA |
|---|---|---|---|
| Evening primrose powder | 8–11% | 32–44 mg | 2.3–3.1 g |
| Borage powder | 18–23% | 72–92 mg | 1.1–1.4 g |
| Blackcurrant powder | 14–19% | 56–76 mg | 1.3–1.8 g |
Writing the source into the specification
Start with the source in the product name: “Microencapsulated evening primrose oil powder 40%” or “Microencapsulated borage oil powder 40%.” Then state the oil load, the GLA range and its basis (on the oil), the fatty-acid profile, the carrier, PV and p-AV, moisture, mesh and the allergen statement. A specification that says “GLA 10% powder” names a figure, not a source.
The certificate should repeat the source, the oil load and the GLA on the oil, and it should carry the measured fatty-acid profile. If the source is a blend, the blend and the ratio belong on the label and the certificate; a blended oil is not the same ingredient as a single-source oil.
Keep the source and the grade as separate decisions. The grade is the oil load and the carrier; the source is the oil. A change to either is a change-control event, not a purchasing swap. Re-run the label, the allergen statement and the stability file after the change.
When not to switch
Do not switch the source if the label already names evening primrose oil, if the customer's specification names the species, or if the market file was built on the EPO route. Do not switch to solve a flow or taste problem that belongs to the carrier or the mesh. Do not switch on a GLA figure alone: the figure can be matched while the fatty-acid profile, the ingredient name and the powder weight all change.
If a lower powder weight is the real requirement, compare the formats before the sources: a higher oil load, a different carrier or an oil may solve it. If the source has to change, keep both specifications open until the label and the stability data are fixed.
The catalog limits are on the evening primrose oil powder product page. The certificate lines are on the COA page, the direct evening primrose versus borage comparison is on the EPO versus borage page, the source evidence is on the identity page, and the label route is on the compliance page.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation