02 Grade comparison

Xylanase grades: activity, form and the production organism

Technical document 02 · Reviewed 2026-11-20 · Xylanase

On this page
  1. Why an enzyme has grades but no purity
  2. The grade options side by side
  3. Powder, mesh and dust
  4. The arithmetic that decides the grade
  5. How to write the grade into a specification
  6. When a different grade is the wrong choice

Xylanase is sold by declared activity, physical form and production source, not by a purity percentage. The catalog grade is an 80 mesh powder at ≥100,000 U/g; granulation is a separate form on request, and a lower-activity dilution or a blend is a different specification. The choice is decided by the dose weight the formula can weigh, the dust the plant can control and the substrate the process contains.

In one line

The grade is fixed by the activity per gram, the physical form and the production organism, not by the word xylanase alone.

Why an enzyme has grades but no purity

A mineral salt can carry a purity figure because the assay weighs the molecule against the rest of the drum. An enzyme preparation resists that description: the powder is enzyme plus fermentation residue plus carrier, and the activity is a rate rather than a proportion. The useful description is a declared activity, the carrier and the particle form.

That is why two suppliers can both offer “xylanase” and mean different materials: one sells a concentrate at ≥100,000 U/g, the other a diluted powder at a fraction of that figure, and the second carries several times the mass for the same units. They are different grades with different jobs, and each certificate has to be read the same way.

What a grade fixes in a formula
PropertyWhat it controlsWhere it shows up
Activity (U/g)How many units a gram deliversDose weight, label basis, overage
Source organismWhich enzyme and which regulatory fileIdentity, stability, permitted use
CarrierWhat the activity is diluted onIngredient list, moisture, flow
Particle size and formHow the powder flows, disperses and dustsBlend uniformity, mixing time
Side activitiesWhat else the preparation doesSubstrate fit, assay interference
Intended useFeed or food processDocument pack and label rules

The grade options side by side

The catalog form is a ≥100,000 U/g powder at 80 mesh. A granulated form is available on request; where a lower-activity dilution is agreed, it is a separate specification, and a blend with another enzyme is a different product.

Xylanase grade options and what changes when you switch
OptionActivityPhysical formWhat changes in the formula
Standard powder≥100,000 U/g80 mesh powderSmallest dose weight; concentrate for blends
Granulated (on request)Agreed in the specificationGranulesLess dust; slower dispersion; check granulation loss
Lower-activity dilution (separate specification)Agreed in the specificationPowderLarger dose weight; carrier becomes an ingredient
Enzyme blend (different product)Each activity declaredPowder or granuleTwo or more activities; the assay and label both change

The activity figure is only comparable when the unit is. A U/g from one supplier and a unit named by another supplier are not the same measurement unless the substrate, pH, temperature and detection step match. The COA page sets out what belongs beside the number.

Powder, mesh and dust

The catalog particle size is ≥95% through 80 mesh, a fine free-flowing powder that blends well into a dry mix and dissolves in water to a clear to slightly turbid solution. The fines that make it disperse quickly also make it dust. Enzyme powders are respiratory sensitisers, so dust is a handling and documentation question: the safety data sheet lists the hazard statements, and the practical controls are extraction at the source, closed transfer and a suitable mask.

Granulation trades dust control against dispersion speed: a granule wets more slowly, so a drink mix or feed premix that must disperse fast is usually built on powder, while a plant handling kilos a day may prefer granules to keep the air clean. The granulation step itself removes activity, and the after-step figure belongs in the specification.

The carrier matters as well. A dilution is not inert: it adds mass, may hold moisture and must be declared if it has a function in the finished product. Ask what the carrier is and at what ratio.

The arithmetic that decides the grade

Units are weight multiplied by activity. A formula that needs 2,000,000 U takes 20 g of a 100,000 U/g powder or 100 g of a 20,000 U/g dilution. The units are identical; the mass and the label entry are not. Moving to a five-fold dilution multiplies the powder weight by five and puts four parts of carrier into the blend for every one part of enzyme powder.

Weighability usually settles it. A 20 g charge is routine in production and awkward in a small pilot, where the balance and the mixer struggle with a speck of powder. A dilution makes the same units weighable, while carrying the carrier through the formula and into the ingredient declaration.

Two cautions sit beside the arithmetic. The label basis has to say whether activity is guaranteed at release or at the end of shelf life. A diluted grade needs a certificate for the diluted lot, not the concentrate it came from. Activity at the end of shelf life is the figure to build the process on, because heat and moisture remove units between release and use.

How to write the grade into a specification

A specification that cannot be tested is not a specification. These lines make this one testable:

  • “Xylanase (endo-1,4-β-xylanase, EC 3.2.1.8), CAS 9025-57-4.”
  • “Activity ≥100,000 U/g, with the unit definition, substrate, pH, temperature and incubation time stated.”
  • “Activity basis: as received or dry solids; release or end of shelf life.”
  • “Production organism and strain; carrier identity.”
  • “Loss on drying ≤8.0%; particle size ≥95% through 80 mesh; form powder or granule.”
  • “Heavy metals and microbiology as listed; side activities declared.”
  • “Intended use: feed or food process; destination market confirmed.”

Write the activity as a one-sided limit (“not less than”) and keep the unit definition in a method appendix under change control. A change of substrate or assay conditions makes two results incomparable even when both say U/g. The catalog values are on the xylanase product page; the checks that keep a diluted lot honest are on the identity page.

When a different grade is the wrong choice

Three situations argue against diluting. A blend already close to its carrier limit gains nothing from more carrier. A formula with a tight moisture budget gains nothing from a carrier that holds water. And a label that needs a compact ingredient list gains nothing from an entry that exists only to make the powder weighable.

Granulation has its own limits: a granule that disperses too slowly can fail a drink mix or a fast feed line, and the granulation loss has to be measured rather than assumed. A blend is wrong when the label names a single enzyme, when the assay is specific to xylanase, or when the second activity is not wanted. The xylanase versus cellulase comparison covers the unit question; the cellulase product page compares a different enzyme; the methods library and the quality page carry the assay and release references.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation