06 Identity & adulteration

How we prove a pectinase lot is the named preparation

Technical document 06 · Reviewed 2026-11-20 · Pectinase

On this page
  1. The chain of evidence
  2. Ratios that describe the preparation
  3. What X-ray diffraction can show
  4. Signals of substitution
  5. Writing identity into the specification
  6. Five questions for the supplier

No single assay identifies an enzyme lot. The file has to connect the source organism, the pectin-digesting activity, the protein pattern, the side-activity profile and the mass balance; each answers a different question and each can fail on its own. A high U/g with no source and no protein data is a result without an identity.

In one line

A pectinase identity file links the source organism, a defined activity assay, a protein pattern and a mass balance; no single number carries the proof.

The chain of evidence

A supplier can print the right name, the right CAS number and a passing activity on one page and still not show that the powder is the preparation it claims. The five layers below are separate questions. Each needs its own result, and a gap in any one of them weakens the conclusion.

Five layers of pectinase identity
LayerEvidenceWhat it catches
SourceOrganism, strain and source recordA preparation from an unnamed or different producer
ActivityPectin-substrate assay with its conditionsA powder that does not digest pectin
ProteinProtein pattern by gel electrophoresisA non-enzyme filler or a different preparation
Side activitiesPectinesterase and pectate lyase resultsA preparation that will behave differently in the tank
Mass balanceActivity, protein, moisture and carrierAn undeclared dilution

Ratios that describe the preparation

Pectin is methyl-esterified in places, and the methyl groups have to come off before polygalacturonase can cut the backbone freely. A preparation with strong polygalacturonase and weak pectinesterase can slow down on a highly esterified pectin, while a different balance moves faster on the same juice. The headline U/g does not show that balance.

Specific activity, in units per milligram of protein, is the first useful ratio: it separates an enzyme-rich powder from one that is mostly carrier. The second is the proportion of the main activity to the side activities, measured on the same sample. Neither figure is on the catalog specification, so ask for them when the process depends on behaviour rather than on the headline number.

A ratio is not a purity grade. A preparation can be highly active per milligram of protein and still carry an unwanted side activity, and a modest specific activity can be normal for a standardised powder. Read the ratios with the mass balance, not instead of it.

What X-ray diffraction can show

X-ray diffraction asks whether a solid is crystalline and whether its pattern matches a reference. An enzyme powder is normally amorphous, so the pattern is a broad halo rather than a set of sharp lines. Sharp lines in a product sold as pure enzyme point to a crystalline carrier, a salt or an inorganic filler.

That makes XRD a check on the carrier, not on the enzyme. It can reveal a crystalline diluent in a “pure” preparation and can compare the solid state of two lots, but it cannot tell pectinase from cellulase. Request the reference diffractogram and the method’s detection limit before accepting a “match” statement, and do not accept an XRD line as identity evidence by itself.

Signals of substitution

Pectinase substitutions and the evidence against them
AdulterantSignalTest
Inert carrierLow U/g with a normal appearanceMass balance, protein, carrier identification
Heat-damaged powderLow units per milligram of protein; darker colourActivity plus protein, batch record
Another enzymeWrong side-activity profileSubstrate panel, protein pattern
Reducing-sugar carrierHigh reagent blank; low proteinBlank subtraction, protein
WaterLow as-is activity; dry basis normalLoss on drying, dry-basis calculation

Appearance proves the least. Off-white to light tan covers a wide range, and a darker powder can be a normal drying result or a damaged lot. The stronger signals are the specific activity, the side-activity profile and the mass balance. A certificate with appearance and U/g but no protein and no profile has not tested the likely substitution.

Writing identity into the specification

  • “Pectinase preparation, CAS 9032-75-1, production organism and strain named.”
  • “Activity ≥30,000 U/g by the pectin-substrate assay; unit definition, substrate, pH, temperature and incubation time stated.”
  • “Protein and specific activity reported where agreed.”
  • “Side-activity profile for polygalacturonase, pectinesterase and pectate lyase where the process depends on it.”
  • “Loss on drying ≤8.0%; ≥95% through 80 mesh.”
  • “Metals and microbiology as listed; carrier named and no undeclared diluent.”
  • “Pack, storage condition and retest period stated.”

Five questions for the supplier

  1. Which organism and strain produced this lot, and can the source record be released?
  2. What are the unit definition, substrate, pH, temperature and incubation time?
  3. What are the protein content and the specific activity?
  4. Which side activities are present, and what is their profile in this lot?
  5. Will you keep a retained sample and accept a joint test against the named method?

Together the five answers make an identity file; an activity percentage alone does not. The specification is published on the product page; the certificate lines are explained on the COA page; the assay terms are in the methods section; the release sequence is set out on the quality page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation