02 Grades & forms

Pectinase grades: activity, form and what changes

Technical document 02 · Reviewed 2026-11-20 · Pectinase

On this page
  1. A name that covers a mixture
  2. Catalog powder and agreed variants
  3. What the form changes in handling
  4. From units to grams
  5. What the specification should say
  6. When another grade is the wrong choice

Pectinase is a preparation, not a single protein, so a grade has to describe more than a number. The catalog item is a ≥30,000 U/g powder milled to 80 mesh; activity, the assay behind the number, side activities, carrier and particle size are the five things that change when a buyer moves to a granulated or custom-activity variant. Each of those changes the weigh-out or the certificate, and some change both.

In one line

A pectinase grade is a specification bundle, not a single activity number: the assay, the side activities, the carrier and the particle size all travel with the U/g.

A name that covers a mixture

Pectin is a heterogeneous polymer: a galacturonic acid backbone, methyl esters in places, and rhamnose-rich stretches with side chains. No single enzyme takes it apart. A fermentation produces polygalacturonase, pectinesterase, pectate lyase and other proteins, and the preparation that reaches the drum is a selected slice of that mixture.

The U/g counts only what the named substrate and assay can see. Two powders at 30,000 U/g can still differ in how quickly they de-esterify a pectin, how they perform at a juice pH, and how much of the gram is carrier. That is why a grade is sold as a bundle and why a purchase order that names only the activity has not finished the specification.

Catalog powder and agreed variants

Pectinase grades and the terms that change
GradeActivityPhysical formWhere it fitsWhat to re-agree
Catalog powder≥30,000 U/g by the pectin-substrate assay80 mesh powderJuice, fruit and powder blendsNothing; this is the baseline
GranulatedStandardised to the same U/gGranule, on requestDust control and flowSieve, dissolution, assay sampling
ConcentrateAbove 30,000 U/g, agreedPowderA smaller weigh-outMethod range, moisture, stability
DilutionBelow 30,000 U/g, agreedPowder plus carrierSmall batches, easier weighingCarrier, micro load, label declaration

Only the first row is a catalog item. The other three are agreements: each gets its own specification, certificate and, where a carrier is added, a label that names it. “On request” describes a specification change, not a stock keeping unit.

What the form changes in handling

The catalog powder is fine, off-white to light tan, ≥95% through 80 mesh, and dissolves in water to a clear to slightly turbid solution. Fine powder wets quickly but makes dust, and enzyme dust is a respiratory sensitiser; the SDS and the dust controls are part of choosing a grade, not an afterthought.

A granule flows better and raises less dust, but it can wet more slowly. A hard granule may sink and lump in a mix tank; a soft one breaks down faster. Granulation usually brings water and heat, and both can cost activity, so the granulated grade needs its own assay rather than the base powder’s certificate. Sample the granule, not the fines, when the lot is checked.

Colour follows drying and the carrier. A granulated or diluted grade may be lighter or more uniform than the base powder while carrying the same activity. Read colour as a process signal, not as a statement about strength.

From units to grams

The certificate gives units per gram of preparation, so the weigh-out is the units the process needs divided by the U/g. A trial that calls for 600,000 U takes 20 g of the 30,000 U/g powder, 10 g of a 60,000 U/g concentrate, or 20 g of a granulated grade standardised to the same figure. These are process quantities, not a human dose and not a recommendation.

Two corrections belong in the same sum. First, the process consumes activity: heat, a pH outside the working window and a long hold all remove units before the product is packed. Second, the certificate may be on dry solids while the balance weighs as-is powder. Measure activity in the matrix at the end of the step, not only on the powder that went in.

A pectinase U/g cannot be converted to a cellulase CU/g. The units rest on different substrates and different assays, with no factor between them; the pectinase and cellulase comparison explains why.

What the specification should say

  • “Pectinase preparation, CAS 9032-75-1, production organism named.”
  • “Activity ≥30,000 U/g by the pectin-substrate assay; unit definition, substrate, pH, temperature and incubation time stated.”
  • “Loss on drying ≤8.0%; ≥95% through 80 mesh.”
  • “Heavy metals Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg; microbiology as listed.”
  • “Side-activity profile for polygalacturonase, pectinesterase and pectate lyase where the process depends on it.”
  • “Carrier or granulation aid named; pack and storage condition stated.”
  • “Destination market and intended use confirmed before the order.”

When another grade is the wrong choice

If the target polymer is cellulose, no pectinase grade will replace a cellulase, whatever the U/g says. If the process runs alkaline or hotter than the enzyme’s window, more activity does not rescue the reaction. If the label has to name one enzyme, a multi-activity preparation makes that label harder to write, and a dilution adds a carrier that must be declared.

A liquid application cannot simply dissolve the powder and call it a liquid grade: water brings a hold time, a preservative question and a microbial risk that the dry powder does not have. Pick the grade against the process first, then write the specification and the label around it.

The specification is published on the pectinase product page; the assay vocabulary is in the methods section; the cellulase option is on the cellulase product page; the release sequence is set out on the quality page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation