02.1 Aspartic vs glutamic

L-Aspartic acid vs L-glutamic acid: two acidic amino acids

Technical document 02.1 · Reviewed 2026-11-19 · L-Aspartic Acid

On this page
  1. One family, two ingredients
  2. The numbers side by side
  3. What the pKa difference does in a formula
  4. Solubility and the dosage form
  5. Taste: umami against sour
  6. The label and the mass

L-Aspartic acid and L-glutamic acid are the two acidic amino acids: each carries a carboxylic acid side chain, but aspartic acid has one methylene between the backbone and the side carboxyl, while glutamic acid has two. That extra methylene moves the molecular weight from 133.10 to 147.13, the side-chain pKa from about 3.65 to 4.25, the solubility, the taste and the mass on a label. They are separate ingredients with separate CAS numbers and specifications.

In one line

One methylene group separates the two acidic amino acids; it moves the molecular weight, the side-chain pKa, the solubility, the taste and the mass on the label.

One family, two ingredients

Both are proteinogenic amino acids with a second carboxyl group. Aspartic acid is 2-aminobutanedioic acid; glutamic acid is 2-aminopentanedioic acid. The side chain is –CH2–CO2H in aspartate and –CH2–CH2–CO2H in glutamate. Both are dicarboxylic and both are acidic, with isoelectric points below pH 3.3. That is where the similarity ends for a buyer.

Each is sold as the free acid and as salts. The salts are different ingredients: calcium aspartate and magnesium aspartate for the first, monosodium glutamate for the second. The free acid is the material this catalog supplies, and the salt is a separate purchase with its own label name and mass per gram.

The numbers side by side

L-aspartic acid and L-glutamic acid · free acids compared
PropertyL-aspartic acidL-glutamic acid
CAS number56-84-856-86-0
Formula and molecular weightC4H7NO4 · 133.10 g/molC5H9NO4 · 147.13 g/mol
Side chain–CH2–CO2H–CH2–CH2–CO2H
pKa, α-carboxylAbout 1.88About 2.19
pKa, side-chain carboxylAbout 3.65About 4.25
pKa, α-amino groupAbout 9.60About 9.67
Isoelectric pointAbout 2.77About 3.22
Water solubility at 25 °CAbout 5 g/LAbout 8.6 g/L

The figures are for the free acids. A salt changes the molecular weight and the mass that carries a given amount of the amino acid, so the table cannot be used to compare a free acid with a salt.

What the pKa difference does in a formula

A pKa is the pH at which half of that group is deprotonated. The side chain of aspartic acid has a pKa near 3.65 and that of glutamic acid near 4.25, a gap of about 0.6 units. In a formula at pH 3, a meaningful share of the aspartate side chain is already deprotonated while the glutamate side chain is less so. At pH 6–7 both are fully ionised and the difference disappears.

That is why the gap matters in acidic drinks and buffers, and not in a neutral capsule. An aspartate buffer works around pH 3.6; a glutamate buffer around pH 4.2. If a formula relies on one of them for its buffering, the other is not a drop-in, even though both are described as acidic amino acids.

pH alone does not identify either acid. Both 1% solutions are acidic, and the windows overlap. The identity comes from the chromatogram and the spectrum, not from a pH meter; the release tests are set out on the COA page.

Solubility and the dosage form

At 25 °C, aspartic acid dissolves to about 5 g/L and glutamic acid to about 8.6 g/L. Both are slightly soluble, and both dissolve better away from their isoelectric points. In a 250 mL drink, 500 mg is 2 g/L and sits inside both limits; 1,000 mg is 4 g/L, close to the aspartic acid limit and still under the glutamic one. Those volumes are theoretical: dissolution rate, pH and the other solutes change the picture.

The salts are far more soluble than the free acids. Calcium aspartate dissolves without an acidulant, and monosodium glutamate is the soluble form of glutamic acid. A formulator who needs a clear, neutral solution usually reaches for the salt, and the label changes with it. Switching from the free acid to a salt to fix solubility is a formulation and labelling decision, not a grade change.

Taste: umami against sour

Glutamic acid is the amino acid behind glutamate's umami taste, and monosodium glutamate is the reference ingredient for that taste. Aspartic acid is sour, and its umami contribution is weaker, so it reads as an acidulant first. At the concentrations where either acid is used in a dry blend, the difference is noticeable and it changes the flavour system and the pH.

Taste is not a release test. A certificate cannot tell you how a powder tastes, and a taste panel is not a substitute for the identity tests. The practical point is narrower: the two acids are not interchangeable in a flavoured product even when the assay on the certificate is identical.

The label and the mass

On a label, the name is the ingredient. “L-aspartic acid” and “L-glutamic acid” are different declarations, and neither is a generic “acidic amino acid”. A formula that switches from one to the other needs a new panel, a new specification and a fresh check of the destination file. A route that covers one is not automatically a route for the other, even though they share a functional class.

The mass arithmetic is simpler than for a salt: the free acid has no counter-ion, so the labelled acid and the weighed acid are the same figure before assay and overage. The salt is the case where a conversion is needed. Calcium di-L-aspartate carries about 0.875 g of aspartate per gram, so 500 mg of aspartic acid from the salt is about 571 mg of powder, and the panel also has to declare the calcium that comes with it. The calcium aspartate page sets out that arithmetic.

The L-aspartic acid hub carries the catalog specification; the grades page places this comparison beside the salt and the racemate; the L-glutamic acid page carries the other specification. The HPLC note explains the separation, and the quality page describes the release workflow.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation