02 Form comparison

L-arginine base or L-arginine HCl: choosing the form

Technical document 02 · Reviewed 2026-11-20 · L-Arginine HCl

On this page
  1. Why the salt is a separate product
  2. The two forms side by side
  3. What the salt is like to handle
  4. The dose arithmetic
  5. Clauses for the specification
  6. When the other form is the right answer

L-Arginine HCl is the monohydrochloride of L-arginine: one molecule of hydrochloric acid per molecule of the amino acid, CAS 1119-34-2, formula C6H14N4O2·HCl and a molecular weight of 210.66. About 82.7% of its mass is arginine and about 16.8% is chloride. The free base is 174.20 g/mol, carries no chloride and gives a pH 10.5–12.0 solution. The two forms are different label ingredients, not two grades of one material.

In one line

The hydrochloride is not a diluted base: it is a separate molecule with its own CAS number, about 83% arginine by mass and a weakly acidic solution, so the dose, the pH and the label move with the form.

Why the salt is a separate product

The hydrochloride exists because the free base is strongly alkaline and takes carbon dioxide from the air. Adding one molecule of HCl protonates the guanidino group, and the resulting salt is still freely soluble in water but gives a weakly acidic solution instead of an alkaline one. That change matters in a capsule, a tablet and a stick pack: the salt does not present the same alkaline surface to an acidic flavour or carrier, and it does not absorb carbon dioxide in the same way.

The trade-off is mass. Every gram of salt carries about 168 mg of chloride, so a dose expressed as arginine needs about 1.21 g of salt. The salt is a legitimate material with its own specification; it is not the base with an impurity added, and the base is not the salt with the chloride removed.

The two forms side by side

L-arginine base and L-arginine hydrochloride
LineL-arginine baseL-arginine hydrochloride
Label nameL-arginineL-arginine hydrochloride
CAS number74-79-31119-34-2
Formula and molecular weightC6H14N4O2 · 174.20C6H14N4O2·HCl · 210.66
Arginine per gram1.00 gAbout 0.827 g
Chloride per gramNoneAbout 0.168 g
pH, 5% solution10.5–12.0Weakly acidic; a range can be agreed on the specification
Water and carbon dioxideHygroscopic; forms a carbonate in airHygroscopic; no alkaline surface for the same reaction
Assay basis98.5–101.5% by titration, dried basis, as the base99.0–101.0% by titration, calculated as the salt
Catalog mesh≥95% through 40 mesh≥95% through 80 mesh

Every row changes something in a formula. The molecular weight changes the dose; the chloride changes the taste and the contact materials; the pH changes the blend and the pack; the assay basis changes what the percentage means; the mesh changes the flow.

What the salt is like to handle

The catalog grade is a white to off-white powder with at least 95% passing 80 mesh, which is finer than the 40 mesh base. The finer powder blends more evenly into a small capsule fill and disperses faster in a stick pack, but it also carries more dust and picks up moisture faster because of the larger surface area. Granulated material is available on request when flow and dust are the problem; granulation changes the particle profile, not the chemistry.

The salt is freely soluble in water and the solution is weakly acidic. The base at pH 10.5–12.0 forces the formulator to buffer and flavour around an alkaline solution; the salt begins on the acidic side, which is a different formulation problem rather than no problem. The chloride load also matters to the process: a concentrated solution is aggressive to some stainless steels, so the contact materials on the line belong in the trial, not in the maintenance log.

The dose arithmetic

The conversion factor is 174.20 ÷ 210.66 = 0.8269. A label that declares 1,000 mg of arginine needs 1,000 ÷ 0.8269 = 1,209 mg of the salt. A capsule filled with 500 mg of the salt carries about 413 mg of arginine. Read the same arithmetic backwards: 1,000 mg of L-arginine hydrochloride on a label means about 827 mg of arginine in the capsule.

The assay basis adds a second correction. A 99.5% assay calculated as the salt is 99.5 × 0.8269 = 82.3% arginine before the moisture correction; at 0.5% loss on drying the as-is figure is about 81.9%. The chloride follows the same mass: 1 g of salt carries about 168 mg of chloride, and 5 g carries about 840 mg, roughly the chloride in 1.4 g of sodium chloride. That is composition arithmetic, not a recommendation, and it belongs in the label and the batch record rather than in a footnote.

The fill weight is where the arithmetic meets the machine. A capsule that must deliver 500 mg of arginine needs about 605 mg of salt, which may be a larger capsule size. A stick pack has more room, and the salt is the easier of the two forms to put into an acidic drink mix, but the chloride still arrives with the dose.

Clauses for the specification

  • “L-arginine hydrochloride, CAS 1119-34-2, C6H14N4O2·HCl; not the free base.”
  • “Assay 99.0–101.0% by titration, calculated as the salt; state the basis and the titrant.”
  • “Specific rotation +21.0° to +23.0° at c=2 in 5 M HCl; state solvent, concentration and temperature.”
  • “Loss on drying ≤0.5%; chloride reported for each lot where the formula is salt-sensitive.”
  • “Particle size ≥95% through 80 mesh, or the agreed granulated distribution.”
  • “Heavy metals and microbiology as on the catalog specification; lot code on the pack, the certificate and the retained sample.”

When the other form is the right answer

Choose the base when the label has to read “L-arginine”, the dose is expressed as arginine, the formula can carry a pH of 10.5–12.0, and no chloride is wanted. The hydrochloride fits when the label names the salt, the matrix prefers a less alkaline ingredient and the chloride can be carried. Neither choice is a substitute for a trial in the real matrix: a sealed acidic pack will still react with the base, and a high-chloride drink will still taste of it.

Do not switch forms to fix a flow problem. Flow problems are solved with mesh and granulation, not by swapping the salt and creating a labelling problem. The product hub carries the catalog specification; the L-arginine page carries the free-base specification; the chloride, pH and label comparison takes the narrow question further; the methods library explains the assays; the quality page covers release and retained samples.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation