GABA grades: purity, particle size and route
GABA is sold as the free amino acid. There is no salt, chelate or ester in the catalog, so a grade is not a chemical form; the molecule is C4H9NO2 at every grade. What a grade fixes is the purity envelope, the contaminant and documentation set, the particle size and the manufacturing route, and those are the lines that move when a buyer asks for something other than the catalog material.
GABA has no salt to choose, so the grade decision is the purity envelope, the particle size and the manufacturing route.
Why the grade question is not a salt question
Mineral ingredients are chosen by their carrier: the same magnesium can arrive as an oxide, a citrate or a bisglycinate, with a different share of the element each time. GABA offers no such choice. The amino acid is the ingredient, the label name does not change with the grade, and there is no ratio to declare between a carrier and an active.
That removes one decision and puts weight on three others. The first is the purity envelope: how wide the assay range is and which related substances are limited. The second is the contaminant and microbiological panel, which is what separates a material sold for food or supplement use from one sold for another purpose. The third is the physical form, because a 40 mesh powder and a granule behave differently on a tablet press and in a stick filler.
The route sits behind all three. Enzymatic decarboxylation of L-glutamate and chemical synthesis lead to the same molecule and to different impurity fingerprints, and a specification that names the route is easier to hold to than one that does not.
The catalog grade and what a different grade changes
| Line | Catalog grade | What to re-check on another grade |
|---|---|---|
| Assay | 99.0–101.0% by HPLC | Is the range wider, and is the method the same? |
| Identity | IR spectrum and HPLC retention | Does the certificate show a spectrum, or only a retention time? |
| Loss on drying | ≤0.5% | Is the moisture allowance wider? |
| pH (1% solution) | 6.5–7.5 | Is the pH row present at all? |
| Heavy metals | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Which element limits apply, and are they per element? |
| Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Is the panel specified, or absent from the certificate? |
| Particle size | ≥95% through 40 mesh | Which cut, and was it measured on the lot? |
| Documents | COA, TDS, SDS, allergen and origin statements | Which statements are missing, and are they lot-specific? |
The table is not a second specification. It is the list of lines to re-read when the material offered is not the catalog grade. A wider assay range can be acceptable for a technical use and is not acceptable under a label that declares 99%; a shorter document set can be acceptable for an industrial buyer and is not enough for a supplement file. The grade has to match the use, not the other way round.
Particle size, flow and dust
The catalog form is a crystalline powder with ≥95% through 40 mesh, which is roughly 425 µm. The sieve figure is a finishing specification: it changes when the mill or the sieve changes, without any change in the chemistry. It is also the line that decides how the powder behaves in a hopper.
Solubility is not the constraint here. The material is freely soluble in water and the solution is neutral. Handling is the constraint. A fine hygroscopic powder picks up moisture in an open room, cakes in a hopper and carries static through a vacuum transfer line, and the same lot can flow well on a dry day and poorly on a humid one.
Granulation answers the flow and dust problem by building larger particles. It is a different particle-size specification, not a packing choice, and the granule must still meet the same assay, moisture and contaminant lines. A granulated grade also wets and dissolves at a different rate, which the formulator has to confirm in the finished mix rather than assume from the powder data.
The dosage form decides which grade is useful
A capsule or a tablet takes the 40 mesh powder when the fill or the compression is forgiving, and a granulated grade when flow or dust is the problem. A stick pack takes the powder because it dissolves quickly, and the foil is there because the powder is hygroscopic. A beverage takes the same powder into water, and the questions move to pH, heat load and preservation. A gummy brings water and heat into the same step, which is where browning becomes possible.
GABA decomposes near 200 °C rather than melting cleanly, so a process temperature well below that is not the difficulty. Water, pH and reducing sugars are. The grade does not change any of them; it decides the particle size and the document set that the formula has to work with.
The amount per serving is a label decision, not a grade decision. A higher assay does not license a smaller weigh-up by itself: the certificate basis, the overage decision and the finished-product test are what allow the label to declare a number.
What to write into a purchase specification
- “Gamma-aminobutyric acid, CAS 56-12-2, C4H9NO2.”
- “Assay 99.0–101.0% by HPLC; the detection and the basis named in the method.”
- “Identity by IR spectrum and HPLC retention; related substances limited.”
- “Loss on drying ≤0.5%; pH 6.5–7.5 in a 1% solution.”
- “Heavy metals Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg; the microbiological panel as listed.”
- “Particle size ≥95% through 40 mesh, or the granule cut agreed in writing.”
- “Route, origin, pack and destination market named on the specification.”
The catalog grade is the material we supply. Two cases sit outside this page. If the brief is really for beta-alanine, GABA is not a substitute and the granule question does not arise: that is a different substance, with a different CAS number and a different label (the comparison is here). If the process needs a coarse granule, the 40 mesh powder is not the answer, and the change has to be specified and quoted rather than requested at the filling line.
The product hub carries the catalog specification; the beta-alanine page covers the amino acid most often confused with this one; the glycine page shows a second small, freely soluble amino acid with its own grade logic; the methods library describes the identity tests; the quality page describes the release file.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation