Beta-alanine vs carnosine: the precursor and the dipeptide
Beta-alanine is a single amino acid: C3H7NO2, molecular weight 89.09, CAS 107-95-9. Carnosine is the dipeptide β-alanyl-L-histidine: C9H14N4O3, molecular weight 226.23, CAS 305-84-0, assembled from beta-alanine and L-histidine. The dipeptide contains a beta-alanine residue but is a different molecule with its own assay, rotation and label. One is not a grade of the other, and the mass arithmetic does not make them interchangeable.
Carnosine contains a beta-alanine residue, but it is a different molecule with its own CAS number, assay, rotation and label.
A peptide bond, not a blend
Beta-alanine is a β-amino acid: its amino group sits on the beta carbon, one position further from the carboxyl group than in an alpha-amino acid. It has no stereocentre and is achiral. L-histidine is an alpha-amino acid with an imidazole side chain and one chiral centre in the L configuration.
In carnosine, the carboxyl group of beta-alanine is joined to the alpha-amino group of L-histidine by an amide bond. The product is a dipeptide, not a salt and not a physical blend. There is no counter-ion to report and no free beta-alanine in a pure lot; the beta-alanine is present as a β-alanyl residue inside the larger molecule.
Hydrolysis reverses the bond and returns one molecule of beta-alanine and one molecule of L-histidine. That reaction explains why a carnosine lot can develop free beta-alanine on storage; a dry beta-alanine powder has no peptide bond to break.
The two materials side by side
| Property | Beta-alanine | Carnosine |
|---|---|---|
| Chemical name | 3-aminopropanoic acid | β-Alanyl-L-histidine |
| CAS number | 107-95-9 | 305-84-0 |
| Formula | C3H7NO2 | C9H14N4O3 |
| Molecular weight | 89.09 | 226.23 |
| Composition | One β-amino acid | Dipeptide of beta-alanine and L-histidine |
| Chirality | Achiral; no rotation | Chiral at the histidine residue; +20.0° to +22.0° |
| Catalogue assay | 99.0–101.0% by HPLC | 98.0–101.0% by HPLC |
| Label name | Beta-alanine | L-Carnosine or carnosine |
The beta-alanine residue is part of carnosine, but the assay, the rotation and the label belong to the dipeptide. A buyer who needs beta-alanine has not bought carnosine, and a buyer who needs carnosine has not bought beta-alanine with a larger number on the certificate.
The mass arithmetic, and what it does not mean
One mole of carnosine (226.23 g) yields one mole of beta-alanine (89.09 g) on complete hydrolysis. One gram of carnosine therefore yields 0.394 g of beta-alanine, or about 394 mg. The reverse direction gives the stoichiometric equivalent: one gram of beta-alanine corresponds to 226.23 ÷ 89.09 = 2.54 g of carnosine.
The bound β-alanyl residue is 89.09 − 18.02 = 71.08 g per mole, or 31.4% of the dipeptide mass. The dipeptide is about 31.4% β-alanyl residue, 60.6% histidyl residue and 8.0% the elements of water; hydrolysis adds that water and gives 39.4% beta-alanine and 68.6% histidine. The distinction matters when a calculation is made from the formula rather than from a certificate.
None of this is a substitution factor. The arithmetic tells a formulator what one molecule contains; it does not turn a beta-alanine specification into a carnosine specification. A label that declares carnosine declares the dipeptide, and a label that declares beta-alanine declares the amino acid. If a product genuinely contains both, each is weighed and declared separately. Using the hydrolysis factor to “convert” one ingredient into the other would change the declaration and the market file, not just the number on the batch sheet.
Two assays that do not substitute for each other
Beta-alanine has no strong ultraviolet chromophore, so its HPLC method usually derivatises the amino group or relies on refractive index or mass spectrometry. Carnosine carries an imidazole ring and can be read at low ultraviolet wavelength, although a derivatisation method is also used. The two methods are not the same method with a different standard, and a certificate should name the detection mode and the column.
The related-substance profile is different in each case. In a carnosine lot, free beta-alanine and free histidine are hydrolysis products and therefore degradation markers. In a beta-alanine lot, L-alanine is the isomer that a selective method has to separate. A laboratory that validates one method for both materials should show the resolution and the limit of quantification for each analyte, not a single peak at a shared retention time.
The assay ranges also differ: 99.0–101.0% for beta-alanine and 98.0–101.0% for carnosine. A beta-alanine certificate at 99.5% does not describe a carnosine lot, and a carnosine certificate at 99.5% does not describe beta-alanine. The number is only meaningful with the name of the material and the method beside it.
The label names one ingredient, not a source
In the European Union the ingredient list uses the name of the ingredient as sold; in the United States the Supplement Facts panel names the dietary ingredient. “Beta-alanine” and “L-carnosine” are different declarations, and “carnosine” is not a synonym for beta-alanine. A product that wants to describe a source has to use a source claim that the destination allows, and that is a separate review from the ingredient identity.
A carnosine certificate cannot support a beta-alanine declaration, and a beta-alanine certificate cannot support a carnosine declaration. Zinc-carnosine is a third material with its own specification, so it is not a substitute for either. The buyer's regulatory team confirms the route for the destination; this page makes no performance claim and no disease-related claim, and it does not assert a market status for either ingredient.
What to write into each specification
- Beta-alanine: “Beta-alanine, CAS 107-95-9, C3H7NO2; assay 99.0–101.0% by HPLC; identity by IR and HPLC; related substances including L-alanine; loss on drying ≤0.5%; pH 5.0–7.0; achiral, no rotation.”
- Carnosine: “L-Carnosine, CAS 305-84-0, C9H14N4O3; assay 98.0–101.0% by HPLC; identity by IR and HPLC; specific rotation +20.0° to +22.0° on the dry basis; loss on drying ≤1.0%; free beta-alanine and histidine as related substances.”
- Common line: “The material is the named ingredient, not a blend with, or a hydrolysate of, the other.”
A purchase order that says “carnosine, beta-alanine source” names neither material cleanly. The specification should use one name, one CAS number and one assay, and the certificate should match all three.
When the brief calls for one or the other
Start from the label and the finished product, not from the list of powders on the shelf. If the label names beta-alanine, the specification is the free amino acid on the beta-alanine product page; if it names carnosine, the specification is the dipeptide on the carnosine product page. If both are declared, both are purchased and both have a certificate.
A change from one to the other is a change of ingredient, not a change of grade. It needs a new specification, a new certificate, a label review and the destination market's file. The grades page covers the physical forms of beta-alanine; the L-alanine page covers the isomer that is most often confused with it; the methods library describes the chromatography; the quality page describes the release file that holds the evidence together.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation