The regulatory file for beta-alanine
Beta-alanine is the free β-amino acid, CAS 107-95-9, and the catalogue specification is the same wherever it is sold. What changes with the market is the route: a food ingredient, a food supplement and an additive are reviewed under different rules, and the buyer's regulatory team decides which one applies. This page maps the file and the documents; it does not decide the route.
The specification identifies the material; the destination file shows the route, the limits and the label that apply.
A chain, not a folder
A regulatory file works as a chain. The specification defines what is being bought; the lot certificate shows what arrived; the destination rule says whether and how it may be used; the label says what the consumer is told. Each link has an owner. The supplier owns the specification and the certificate, the buyer owns the route and the label, and the handover between them should be explicit.
The name is the anchor of the chain. “Beta-alanine” is a different substance from L-alanine, DL-alanine and carnosine, and the file should use the name and the CAS number throughout. The product is the free amino acid, and there is no L or D prefix to settle, which removes one common source of paperwork; the identity risk moves to the isomer and to the dipeptide instead.
The destination can split the file further. Great Britain and Northern Ireland are checked separately: the GB register and GB labelling rules apply in Great Britain, while Northern Ireland follows the EU framework. The buyer's team should say which one applies before the specification is fixed, and the file should record the answer.
European Union
The EU review starts with the general food law in Regulation (EC) No 178/2002, the labelling rules in Regulation (EU) No 1169/2011 and, for supplements, Directive 2002/46/EC. A flavouring use brings Regulation (EC) No 1334/2008 into the file instead of, or alongside, the supplement rules. The buyer's team identifies the route for the destination member state and checks that the specification matches the material being placed on the market.
The novel-food question sits in Regulation (EU) 2015/2283. The team checks the history of consumption in the EU before 15 May 1997 and whether an authorisation or a notification is needed. A supplier page cannot answer that for a destination; the current Union list and the consolidated text are the references.
The contaminant rules sit in Regulation (EU) 2023/915 at the time of writing. That text limits lead, cadmium and mercury in food supplements, with category notes; arsenic has no harmonised supplement maximum there, so a customer or market limit applies. Claims are reviewed under Regulation (EC) No 1924/2006. The current consolidated text governs, not a summary.
United States
For a dietary supplement, start with the dietary-ingredient definition in the Federal Food, Drug, and Cosmetic Act, as DSHEA amended it. An ingredient marketed in the United States before 15 October 1994 is not new; otherwise a premarket notification under 21 CFR 190.6 may be required. The supplier can provide identity, composition and manufacturing information; the legal determination belongs to the buyer.
The finished product is made under the current good-manufacturing-practice rules in 21 CFR 111, and the Supplement Facts panel follows 21 CFR 101.36. A structure or function statement needs substantiation and the required disclaimer, and a disease-related claim is not permitted for a dietary supplement. A conventional food use is a different route with a different set of documents.
Beta-alanine's name should appear on the panel exactly as the ingredient is identified in the specification. “Alanine” alone does not distinguish it from L-alanine or DL-alanine, and a panel that uses the generic word has left the identity open even when the certificate is correct.
Contaminants and the serving calculation
The catalogue limits apply to the powder, not to the finished product. The lot result is converted to the amount per serving and compared with the limit for the destination; the stricter of the two governs. A result that passes the drum can still fail the serving calculation when the amount per serving is large.
| Contaminant | Catalogue maximum | Evidence for the finished product |
|---|---|---|
| Lead (Pb) | ≤3 mg/kg | Measured result, method and serving arithmetic |
| Arsenic (As) | ≤2 mg/kg | Measured result and the agreed market limit |
| Cadmium (Cd) | ≤1 mg/kg | Measured result and any category exception |
| Mercury (Hg) | ≤0.1 mg/kg | Measured result and method |
The arithmetic is short: multiply the lot result by the ingredient mass per serving and divide by the finished-product mass. For a capsule, the mass is the fill weight; for a powder, the serving. Put the calculation in the file next to the certificate, so a reviewer can follow it without rebuilding it.
Label and claim boundary
The label names the material and the amount. For beta-alanine the name should be written out, not shortened to “alanine”, and it should not carry an L or D prefix. The ingredient list, the Supplement Facts panel, the specification and the certificate should agree on the name and the CAS number.
The claim review is a separate process with its own rules: Regulation (EC) No 1924/2006 in the EU, the structure or function framework in the US, and the destination's own rules elsewhere. This page makes no performance claim and no disease-related claim, and a supplier's certificate does not approve a claim. The brand's reviewer decides what the finished product may say; the specification does not change because a claim is added.
The document set
| Document | What it must show |
|---|---|
| Specification | Name, CAS, grade, assay basis, identity tests and related-substance limits, with a version and date |
| Batch certificate | The measured results for the lot, the methods, the related-substance results and the lot code |
| Technical and safety data sheets | The specification summary and the handling information |
| Allergen, GMO and origin statements | The declarations the destination or the customer requires |
| Residual-solvent statement | The solvents used in the process and their limits |
| Intended-use statement | The route and the market the file is meant to support |
The documents should tell one story. A certificate that reports a granulated powder against a 40 mesh specification, or a label that names “alanine” against a beta-alanine certificate, is a mismatch even when each document is internally correct. Keep a version list; a folder of undated PDFs cannot be tied to a specification revision.
Checks before the first order
- The specification names beta-alanine, CAS 107-95-9, and the grade, with a version and date.
- The certificate reports identity, assay with its basis, and the agreed L-alanine result.
- The contaminant results are converted to the finished-product serving.
- The destination route and the label have been reviewed by the buyer's team.
- Allergen, GMO, origin and residual-solvent statements are on file.
- Source, process, grade and pack are under change control.
Start with the beta-alanine page for the catalogue values. The COA page covers the lot certificate, the identity page covers the isomer tests, and the quality page covers release. Framework notes are held in the regulatory library.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation