The regulatory file for whey protein isolate
Whey protein isolate is an ordinary food ingredient in the European Union, the United States and the United Kingdom. It is not a novel food, not a regulated additive and not a drug, and no pre-market approval is needed to place it on the market as an ingredient. What decides whether a lot can be used is narrower: the milk allergen declaration, the protein basis behind the panel, and the contaminant limits applied to the product as sold. The buyer's regulatory team confirms the route for the destination.
Whey protein isolate is an ordinary food ingredient; the file turns on the milk allergen declaration, the protein basis behind the panel and the contaminants, not on permission.
The three checks in the file
Check one is status: whether the material may be sold as a food ingredient where it is going, and for whey protein the answer is yes in all three markets. Check two is declaration: milk is an allergen, the ingredient name has to be understood, and the panel figures have to be on the label's basis. Check three is contamination: the heavy-metal and microbiological results have to be converted to the product as sold at the dose taken.
Each check has a different owner: status sits with the supplier and the importer, the allergen with the recipe and the label, the contaminant calculation with the food category and the daily dose, and any claim with the brand. The catalog specification and the COA support all three; neither settles a route alone.
European Union
Whey protein isolate is a milk-derived food ingredient. Labelling follows Regulation (EU) No 1169/2011, and milk is on the Annex II allergen list, so the ingredient list must emphasise it — “whey protein isolate (milk)” with milk in bold or capitals is the usual form. The declaration follows the ingredient into every product that contains it, including a capsule or a stick pack; there is no exemption for a supplement.
Food supplements fall under Directive 2002/46/EC and the national measures that implement it, which set the notification and labelling route in each member state. Protein on the nutrition declaration is normally calculated as total nitrogen × 6.25 unless a specific factor is used; this specification reports 6.38, the milk-protein factor, and the two readings of the same nitrogen result differ by about 2.1%. The buyer's team confirms which factor the label uses.
United States
In the United States, whey protein isolate is used as a food ingredient and as a dietary ingredient in supplements. The milk declaration is mandatory under FALCPA: the label must state milk, either as “Contains: milk” or in a parenthetical in the ingredient statement. It applies to an isolate with ≤1.0% lactose exactly as to a concentrate, because the allergen is protein, not sugar.
A supplement is made under the cGMP rule in 21 CFR 111, which puts the identity, purity, strength and composition of the ingredient under the finished product's quality system. The panel uses 6.25 by default while a specific 6.38 factor exists for milk protein, so the certificate and the panel can differ by about 2% on the same powder; the gap should be understood rather than discovered at label review.
Contaminants and limits
Contaminant limits apply to the finished product as sold, not to the drum. In the EU, lead, cadmium and mercury in food supplements are set by Commission Regulation (EU) 2023/915 as of this review; for a supplement the lot result is scaled to the ingredient's share of the daily portion.
| Parameter | Usual supplement reference | What the file should show |
|---|---|---|
| Lead (Pb) | 3.0 mg/kg in the product as sold | Lot result, method and the finished-product calculation |
| Cadmium (Cd) | 1.0 mg/kg in the product as sold | Lot result and any category exception |
| Mercury (Hg) | 0.10 mg/kg in the product as sold | Lot result and method |
| Arsenic (As) | Customer or market limit | The agreed limit and the method, stated on the certificate |
| Melamine | Market-specific, where required | A statement and the limit it was screened against |
| Microbiology | APC and absence tests | Count, absence statement and the sampling plan |
Melamine is not part of the catalog release panel: it is a nitrogen-rich adulterant that a Kjeldahl figure reads as protein, so where the market requires a statement the lot is screened separately. The catalog microbiology limits are APC ≤1,000 cfu/g, yeast and mould ≤100 cfu/g, and E. coli and Salmonella absent; a finished product can be tighter and often is.
Label and claims
The allergen declaration is not optional and not a claim. It sits on the pack whatever the marketing says, and no formulation change removes it while the protein is milk-derived. Claims sit in a different review: the brand's reviewer checks the wording against the product, the dose and the market, and a statement about what the protein does in the body is a health claim, not a property of the ingredient.
Protein claims are nutrition claims under Regulation (EC) No 1924/2006. In the EU, “source of protein” requires protein to supply at least 12% of the energy value and “high protein” at least 20%; for a supplement the basis is normally the daily portion, which the buyer's team confirms. In the US, “good source” means 10–19% of the Daily Value and “high” at least 20%, against a protein Daily Value of 50 g. No EU health claim is authorised for whey protein as such, and an Article 13 or 14 submission is a separate exercise.
Two words deserve care. “Lactose-free” has no harmonised definition in the EU or the US, so a claim needs a threshold and a method agreed in advance, and “dairy-free” should not appear on a pack that declares milk. This site publishes the specification and makes no health claim.
Documents for the file
The file needs the COA with protein on its stated basis, fat, lactose, ash, moisture, the metal panel and microbiology; the specification with its revision number; the TDS and the SDS; and the milk allergen statement, which belongs with every lot. It also needs the origin of the milk and the country of manufacture, a GMO statement, an antibiotic-residue statement for the dairy source, a melamine statement where required, and the lecithin source if the form is instantized.
Where a statement is missing, name the gap before the order moves. The product page carries the catalog specification, the COA page shows how each line is reported, and the methods library describes the tests behind them.
Checklist before the first order
- Specification version, CAS and the exact form are named.
- The milk allergen statement is on file for the lot, and milk is declared in every finished pack.
- Protein is stated with its factor and basis, and the panel's factor is confirmed.
- Fat, lactose and ash limits are on the specification, not only in a sales email.
- The contaminant results are converted to the finished-product dose.
- Claims and the ingredient name have been reviewed for the destination.
The quality page describes the release file, and the concentrate compliance page covers the same framework for the other grade of the family.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation