Micellar casein: MOQ, packaging and ordering
The minimum is one kilogram because the first question a formulator has to answer is whether the powder disperses in the mixer, and a 25 kg drum cannot answer it. The drum is the production pack; the pouch is the trial pack. Lead time, the document pack and the agreed specification decide whether an order ships, and the minimum only decides how the conversation starts.
The 1 kg pouch exists so a formulator can test dispersion before a 25 kg drum is ordered, and a quotation should answer the specification before it answers the quantity.
Why the minimum is 1 kg
A protein powder is not bought on a certificate alone. It has to wet out in the plant's mixer, flow through the feeder, survive the flavour system and, in a bar, hold its texture for the length of the shelf life. None of those can be tested on 50 g. A kilogram is enough for a bench trial, a small pilot mix and a retained sample, which is why it is the smallest pack that answers a real question.
The pouch is filled from bulk under controlled conditions and carries the same lot number as the drum it came from. That matters: a sample from a different lot, or a hand-filled bag with no lot number, cannot be compared with the production material later. Ask for the sample to be drawn from a production lot and labelled with the lot, the production date and the pack size.
The minimum is a handling limit, not a commercial threshold. Repacking a kilogram takes time, a clean area and a label, and the trial pack is handled as a pack rather than as a fraction of a drum. The useful comparison is between suppliers who ship the same pack with the same documents; a smaller bag with no COA is not a shorter path to a decision; it is a decision without evidence.
The two packs
| Pack | Use | What to check on arrival |
|---|---|---|
| 1 kg foil pouch | Trial, sample, small batch | Seal, lot number, production date, allergen statement |
| 25 kg fiber drum | Production, blending, repacking | Liner integrity, drum condition, net weight, label |
Both packs have an inner liner, and the liner is the moisture barrier. A drum that has been dropped can crack the liner without showing damage on the outside, so the liner is worth checking before the drum is opened. The pouch is the easier pack to reseal and the easier one to leave open; a half-used pouch in a humid room will cake at the surface, which is a storage failure rather than a material failure.
Agglomerated and instantized versions are available on request. They come in the same nominal packs but at a lower bulk density, so the fill weight is the same and the volume is not. If the packing line is set for a fixed volume, confirm the bulk density before the first drum is ordered.
Lead time
The standard pack is quoted at one to seven working days, depending on the quantity and the stock position at the time of the order. The range is wide because a single pouch and a pallet of drums do not move through the same steps. A custom form — a different mesh, an agglomerated grade, a blend — starts after that range and needs its own schedule.
Documents travel with the shipment, and a complete set should be ready before the goods leave rather than after they arrive. If a customer needs a specific COA format, a third-party report or a legalised document, say so in the enquiry, because those additions change the date. The COA page lists what the standard certificate contains.
What a quotation has to answer
Six lines decide whether two quotations describe the same material. If one is missing, the comparison is incomplete whatever the total says.
| Line | What it should state |
|---|---|
| Specification | The form, the revision and the protein basis with its factor |
| Physical form | 80 mesh, agglomerated or instantized; bulk density if relevant |
| Pack and quantity | 1 kg pouch or 25 kg drum, number of packs, net weight |
| Delivery | Incoterm, named place and the expected transit |
| Documents | COA, specification, allergen statement, SDS and origin |
| Lead time | Dispatch date, allocation and remaining shelf life on arrival |
A quotation that names only the product and the quantity leaves the buyer to guess at five of the six. The grade page explains why the form belongs on the first line and not in a footnote.
The sample, and what to do with it
Order the sample against the specification you intend to buy, not against a generic grade. When it arrives, split it: one part for the bench trial, one part retained in the original pack. Record the lot number, the date and the conditions in the trial report. If the trial fails, the retained sample is the only way to tell whether the powder changed or the trial did.
Test in this order: dispersion in the plant's water at the plant's temperature, then the feeder, then the flavour system, then the finished format. A powder that disperses in a laboratory blender can still bridge in a hopper, and a powder that tastes neutral in water can change in a bar over a month. The stability page sets out what to measure while the trial runs.
Terms worth agreeing before the first drum
Write the minimum quantity per line, the pack, the specification revision and the minimum remaining shelf life into the purchase order. Agree what happens if a lot fails the specification on arrival: who pays for the return, whether a replacement is allocated from the next production, and how the retained sample is used in the discussion. Agree the document set that must accompany each shipment, and the point at which the buyer takes title and risk.
These are ordinary terms, but they are the ones that decide whether a second order is easy. The MOQ glossary entry defines the quantity convention, and the logistics page covers the movement side. The pack, the form and the specification are on the micellar casein product page.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation