02 Salt composition

Calcium aspartate grades: the salt composition, the hydrate and the mesh

Technical document 02 · Reviewed 2026-11-19 · Calcium Aspartate

On this page
  1. Why the name is not a specification
  2. The trade descriptions side by side
  3. Solubility, water and particle size
  4. What the calcium figure does to the dose
  5. Writing the grade into the specification
  6. When another salt is the better fit

Calcium aspartate is sold as a family of materials, not as one powder. The name covers the di-aspartate salt used in this catalog, a 1:1 salt with a much higher calcium figure, the L and DL forms, and different water and particle-size grades. The catalog grade is the di-L-aspartate at 12.0–14.0% calcium and ≥95% through 40 mesh; the composition and the calcium figure decide the dose before the mesh does.

In one line

The name calcium aspartate does not fix the calcium figure: the di-aspartate, the 1:1 salt and the hydrate each put a different amount of calcium in the same gram.

Why the name is not a specification

Aspartic acid carries two carboxyl groups, and calcium can be associated with the aspartate in more than one ratio. In the di-aspartate, two aspartate ligands sit with one calcium ion, giving the formula C8H12CaN2O8 and about 13.2% calcium when anhydrous. In the 1:1 salt, one aspartate carries one calcium and the calcium figure is about 23.4%. Both are described as calcium aspartate in trade, and both can be sold as a white powder.

The catalog grade is the di-L-aspartate, and its calcium window is 12.0–14.0%. That window already allows for a few percent of water; a hydrated lot sits at the lower end of it. The L and DL forms share a formula but not an optical rotation, and the label can name the ligand only if the certificate supports it.

None of this is a purity tier. A 1:1 salt is not a cleaner version of the di-aspartate, and a hydrate is not a diluted one. They are different weigh-ups for the same label claim, and the specification has to say which one is in the drum.

The trade descriptions side by side

What the name calcium aspartate can describe
DescriptionFormulaCalciumWhat changes
Di-L-aspartate (catalog)C8H12CaN2O812.0–14.0% as-is; about 13.2% anhydrousThe grade supplied here; two aspartate ligands per calcium
L-aspartate, 1:1C4H5CaNO4About 23.4%Roughly half the powder for the same calcium claim
Hydrated gradeFormula plus water of crystallisationBelow 13.2% as-is, in proportion to the waterMore mass per calcium; loss on drying moves
Granulated gradeSame chemistry as the catalogSame windowFlow and dust change; particle size moves
Dilution or blendCarrier plus aspartateBelow the windowA different label ingredient; identity needs the ratio

The first two rows are the ones that cause label errors. A buyer who compares two quotations on the calcium percentage alone may be looking at two different salts, and the one with the higher figure is not automatically the better buy: it changes the fill weight, the capsule count and the source name on the pack.

Solubility, water and particle size

The catalog material is a white to off-white, free-flowing powder. It is soluble in water, and the solution is neutral to slightly acidic; the salt dissolves without the acidulant that a sparingly soluble calcium salt would need. That is a processing property, not a statement about how the calcium behaves in the body.

The water limit is ≤6.0% loss on drying. Water is the quiet variable in this grade: it raises the powder mass, lowers the as-is calcium figure and can turn a free-flowing powder into a caked one. A lot at the top of the water limit can still meet the calcium window, but the weigh-up has to use the as-is figure, not the anhydrous one.

The catalog particle size is ≥95% through 40 mesh. Granulation is available on request and is a different particle-size specification, not a packing choice. If the dosage form needs a denser or freer-flowing powder, ask before the quotation; the COA page shows where the mesh line sits on the certificate.

What the calcium figure does to the dose

At 12.0–14.0% calcium, 200 mg of calcium needs 1.43–1.67 g of the salt, and 500 mg needs 3.57–4.17 g. A size 00 capsule holds roughly 600–700 mg of a mineral powder, so a 500 mg calcium claim from this grade runs to about six capsules before any excipient is added. A stick pack or a tablet is the easier home for that mass.

This is the same calcium band as calcium lactate pentahydrate, which is specified at 13.0–14.0%. The two salts are close on mass per gram and far apart on the ligand; the calcium lactate page is the useful comparison when the dose is fixed and the counter-ion is still open. The citrate comparison is a different arithmetic, and it is set out on the aspartate versus citrate page.

Writing the grade into the specification

  • “Calcium di-L-aspartate, C8H12CaN2O8; CAS number as stated in the catalog and on the certificate.”
  • “Assay 98.0–102.0% by HPLC on the dried basis; name the detector.”
  • “Calcium 12.0–14.0% as-is by complexometric EDTA titration.”
  • “Loss on drying ≤6.0%; state the water result on the certificate.”
  • “Identification by IR and HPLC; specific rotation positive for the L form.”
  • “Particle size ≥95% through 40 mesh; heavy metals and microbiology as listed.”
  • “No added calcium carbonate, calcium citrate or maltodextrin.”

The composition clause is the one that prevents a substitution. “Calcium aspartate” alone does not say whether the lot is the 1:1 or the 2:1 salt, and a specification that leaves the ratio open cannot be enforced at the loading dock. Write the formula, the calcium window and the rotation into the same document.

When another salt is the better fit

If the label names calcium citrate or calcium carbonate, this grade is not a drop-in: the source name, the calcium figure and the fill weight all change together. If the brief is a compact high-dose tablet or a two-capsule serving, a salt with 21% calcium or more leaves less powder in the unit, and the aspartate's solubility does not compensate for the extra mass.

If the process needs an effervescent reaction, the carbonate is the only common calcium salt that supplies the gas; aspartate dissolves without fizz. If the buyer specifically wants the 1:1 salt, this catalog grade is the wrong material even though the name matches.

The product hub carries the catalog figures. The identity page explains how the composition is proved; the compliance page covers the source name and the destination file; the stability page covers the water and the pack.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation