05 Compliance

The regulatory file for pomegranate seed oil

Technical document 05 · Reviewed 2026-11-19 · Pomegranate Seed Oil

On this page
  1. What the file has to establish
  2. European Union
  3. United States
  4. Contaminants to convert to the finished serving
  5. Claims and process wording
  6. Documents to keep with the lot
  7. Before the first order

Pomegranate seed oil is a food oil pressed from the seeds of Punica granatum, and its regulatory file is built from the specification, the lot certificate, the contaminant results and the label. The destination decides the route: a food supplement, a food ingredient and a cosmetic are three different files. The buyer's regulatory team confirms which route applies before the first order.

In one line

The specification describes the oil; the regulatory file shows the route, the contaminant limits and the label for the destination.

What the file has to establish

A complete file answers four questions. What is the material, and which specification version is being bought? Which lot is being released, and what does its certificate report? Which limits and label rules apply to the finished product? And what changes if the seed source, the process or the pack changes? The certificate answers the lot question, the technical data sheet answers the specification question, and the safety data sheet answers the handling question. None of them answers the route question on its own.

The oil is not a single chemical: the file follows the plant, the part and the process. “Pomegranate seed oil” without the plant part and the press record is not a complete description, and a folder of undated documents is not a file.

European Union

The EU file starts with general food law (EC) 178/2002, the food supplements directive 2002/46/EC and the labelling regulation (EU) 1169/2011. Contaminants are checked against the current regulation, (EU) 2023/915, and pesticide residues against (EC) 396/2005. Hygiene, traceability and the nutrition and health claims regulation (EC) 1924/2006 sit alongside them. The novel-food regulation (EU) 2015/2283 is a separate question: the buyer's regulatory team confirms whether the seed oil has a history of use in the EU before the cut-off and whether a novel-food route is needed. The fruit's history is not automatically the seed oil's history, and this page does not assert that either route applies.

United States

In the United States the route depends on the intended use. A dietary supplement sits under DSHEA, with the dietary ingredient basis confirmed by the brand and the label reviewed as a Supplement Facts panel; a food use has a different basis, and a cosmetic use is a different file again. The buyer confirms the basis and the NDI notification or GRAS position where one applies; the supplier cannot decide the brand's route. Current good manufacturing practice for supplements sits in 21 CFR 111, and the allergen declaration has to cover the oil and anything added to it, including a carrier. A cosmetic safety assessment does not belong in a supplement folder.

Contaminants to convert to the finished serving

The catalogue limits below are supplier gates, not the destination limits; the stricter of the two applies. A result in mg/kg of oil is not an exposure until it is multiplied by the oil mass in the finished serving.

Contaminant limits and the evidence a market file should carry
ParameterCatalogue limitWhat the file should show
Lead≤3 mg/kgLot result, method, finished-serving calculation
Arsenic≤2 mg/kgLot result and method
Cadmium≤1 mg/kgLot result and the category rule
Mercury≤0.1 mg/kgLot result and method
PesticidesNo catalogue lineMulti-residue screen, LOQ, fat-soluble residues
PAH4No catalogue lineResult where drying or heating raises the risk

A refined grade adds 3-MCPD and glycidyl ester questions and a solvent-residue check; a cold-pressed grade should be solvent-free, but the statement still belongs on file. Mineral oil hydrocarbons and packaging migrants are worth a screen when the oil is stored in a lined drum or a printed pack.

Claims and process wording

No disease claim belongs on the label or in this file. A composition statement such as “punicic acid 60–80%” is not a health claim, but it still has to be true for the lot and consistent with the specification. “Cold-pressed” describes a process, not a benefit. “Rich in” is a nutrition claim with conditions, and “antioxidant” is a claim; the brand's reviewer checks the wording against the market's claim rules. The tocopherols naturally present in the oil are a composition fact, not a claim. This page is not label copy.

Documents to keep with the lot

Records that support a pomegranate seed oil market file
DocumentWhat it coversWhat to check
SpecificationIdentity, profile and limitsRevision and date
COALot resultsLot code and test dates
SDSHandling and hazardsRevision
Allergen statementOil and carrierFacility and carrier
GMO statementInputs and processScope
Origin statementSeed originCountry or region
Pesticide, PAH, solventResultsLot and LOQ
Organic, halal, kosherIf claimedCertificate scope and id

Each document should identify the lot or the specification version it supports. An undated statement is a description, not evidence.

Before the first order

  • Product name, plant part, process and specification version are named.
  • The destination and route are confirmed by the buyer's regulatory team.
  • COA, TDS, SDS, allergen, GMO, origin, pesticide, PAH and solvent statements are on file.
  • Contaminant results are converted to the finished serving.
  • The label and claims are reviewed for the destination.
  • Pack, retest period and change control are agreed.
  • The quotation, specification and certificate refer to the same version.

The catalogue specification is on the pomegranate seed oil product page; the lot tests are on the COA page; the identity evidence is on the identity page. The quality page describes the release file, the EU regulatory note gives the framework references, and analytical methods cover the tests behind the numbers. The evening primrose oil powder page shows how a carrier adds a label line.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation