The regulatory file for refined coconut oil
Refined coconut oil is bought against a specification and a destination, and the regulatory file connects the two. It carries the grade, the fatty acid profile, the contaminant results, the allergen and origin statements, and the label review for the market where the finished product will be sold. The buyer's regulatory team confirms the route; this page sets out the paperwork and the checks a buyer should expect.
A coconut oil file has to connect three things: the grade on the specification, the results on the lot certificate and the label rules of the destination market.
What the file contains
Four questions drive the file. First, what exactly is being bought: which grade, which specification version and which CAS number? Second, which lot is on the certificate, and what did the laboratory measure on it? Third, what limits and label rules apply in the destination market and at the intended dose? Fourth, what happens to the approval when the crush, the refiner or the packaging line changes? The certificate, the technical data sheet and the safety data sheet each answer one part, and none of them settles the route by itself.
The allergen statement, the GMO statement, the origin record, the refining record and any customer-specific declaration belong in the same file. If a statement cannot be supplied for a lot, raise that before the purchase order rather than at the port. Version numbers and dates on each document save more time than a pile of undated files.
European Union
For the EU, the review starts with the grade, then the contaminant data, then the label. Regulation (EC) No 178/2002 sets the general food-law frame, Regulation (EU) No 1169/2011 governs the information given to the consumer, and Regulation (EU) 2023/915 carries the contaminant limits current at this review. Refined oils also bring the process contaminants into scope: 3-MCPD, its fatty acid esters and glycidyl fatty acid esters are checked against the category and level in the current text.
The label is a separate review from the specification. Ingredient name, net quantity, nutrition declaration and any grade claim are tested against the EU rules that apply to the finished product. The buyer's regulatory team decides how the oil will be positioned in the destination country and checks that the file describes the material actually placed on the market.
Great Britain and Northern Ireland do not share one file. GB rules apply in Great Britain, while Northern Ireland is handled under the EU framework; the buyer decides which file the shipment needs.
United States
For the United States, the file turns on the ingredient and what it will be used for. The supplier should identify the basis it is relying on and supply the document behind it, and the buyer checks that the same basis reaches the finished product. The Federal Food, Drug, and Cosmetic Act, the labelling provisions in 21 CFR 101 and, where the product is a dietary supplement, the cGMP requirements in 21 CFR 111 are the references normally checked; a conventional food use also brings 21 CFR 117 into the review.
Claims and labels are reviewed on their own track. A “virgin” or “cold-pressed” statement needs a process record that supports it, not just the wording on the purchase order.
Contaminants and limits
The limits below are measured on the drum, but the compliance question is asked at the finished-product dose. Convert each lot result to the daily intake, then compare it with the destination rule. The catalog limits in the middle column are the starting point, not the final answer.
| Parameter | Catalog limit | Evidence the file needs |
|---|---|---|
| Lead (Pb) | ≤3 mg/kg | Result, method and dose calculation |
| Arsenic (As) | ≤2 mg/kg | Lot result and the agreed limit |
| Cadmium (Cd) | ≤1 mg/kg | Result; note any category exception |
| Mercury (Hg) | ≤0.1 mg/kg | Result plus method |
| 3-MCPD and glycidyl esters | — | Destination limit, current text, and a lot statement |
| PAH4 | — | Destination limit and a drying-process statement |
| Free fatty acid and peroxide value | ≤0.10% and ≤5.0 meq O₂/kg | Lot results and the storage history |
Two of these lines matter particularly for coconut oil. Refined oil can carry 3-MCPD and glycidyl esters from the deodorisation step, and copra drying can be a source of polycyclic aromatic hydrocarbons. A heavy-metal panel catches neither, so both should be named in the file when the destination sets a limit.
Label and claims
The ingredient name on the label has to match what the destination requires: “coconut oil” for the oil, plus the grade where a grade claim is made. If the material is a powder on carrier, the carrier is part of the ingredient declaration. Allergen labelling follows the destination list and the source; the buyer's regulatory team decides whether coconut must be named on the finished label.
No disease-related claim is made here. A structure or function claim is the brand's responsibility and is reviewed against the market rules; it neither changes the specification nor validates the certificate, and no certificate can approve a claim.
Documents in the file
- Version-controlled specification, with grade, profile and limits.
- Lot certificate of analysis, methods and results included.
- Technical data sheet; safety data sheet.
- Allergen statement; GMO statement; country of origin.
- Refining record covering extraction and deodorisation.
- Heavy-metal, 3-MCPD, glycidyl ester and, where required, PAH statements.
- Packaging declaration and lot-code traceability.
Checklist before the first order
- The grade, specification version and CAS number are fixed in writing.
- COA, TDS, SDS, allergen, GMO and origin records are present and dated.
- The label and claim review is complete for the destination.
- Each contaminant result has been recalculated at the finished-product dose.
- The extraction and deodorisation route is documented, with the process-contaminant statements.
- Quotation, specification and certificate all cite the same version.
The coconut oil hub holds the current catalog data. The identity page covers the tests behind identity, the COA page explains the certificate, the quality page sets out the release process, and the methods section explains the analytical methods.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation