USP vs TU: what a papain unit actually means
USP units and TU both measure tyrosine released from casein, but they are not the same unit. The USP unit is defined through the USP casein assay and its reference standard; TU is a supplier convention, commonly defined as 1 µg of tyrosine released per minute. A 6,000 USP units/mg powder is therefore not 6,000 TU/mg, and trade listings often put the same powder near 100 TU/mg. The only conversion worth trusting is a pair of assays run on the same lot.
USP and TU count tyrosine release on different time bases and against different method details, so the numbers differ by a large factor and no universal conversion factor exists.
Two units, two definitions
The names sound interchangeable because both are built on casein and tyrosine. They are not. A unit is a definition plus a method, and the two systems define the rate differently and report it against different standards.
| Unit | Definition | Time basis | Where it is used |
|---|---|---|---|
| USP unit | Tyrosine equivalent released from specified casein under the USP assay, at the enzyme concentration giving 40 µg/mL | 60-minute incubation | USP monograph, pharmacopoeial certificates |
| FCC PU | 1 µg of tyrosine liberated per hour under the FCC casein assay | 60 minutes | Food Chemicals Codex, North American trade |
| TU | 1 µg of tyrosine liberated per minute under the supplier's casein method | 1 minute | Supplier conventions, common in Asian trade |
| U/mg, undefined | No substrate, pH, temperature or time stated | — | Not comparable to anything |
The time base alone explains most of the gap. A unit defined per minute will count about sixty times as many units as a unit defined per hour on the same hydrolysis.
The substrate and the standard
The USP assay uses Hammersten-type casein dispersed in phosphate buffer, adjusted to pH 6.0, incubated for 60 minutes at 40 °C and stopped with trichloroacetic acid. The filtrate is read at 280 nm, and the result is interpolated from a standard curve built with USP Papain Reference Standard. The buffer contains cysteine and edetate: the reducing agent keeps the active-site cysteine in its thiol form, and the chelator holds back metal ions that would oxidise it or compete for the site.
Casein is not a single pure molecule. Different casein grades, substrate concentrations and precipitation steps change the amount of tyrosine-containing peptide that reaches the absorbance reading. The USP method controls this by fixing the substrate preparation and by expressing the result against a reference standard rather than against an absolute extinction coefficient. A TU method that uses a different casein lot, a different buffer or a different reading wavelength is a different assay, even if the unit name is the same.
Conditions that move the figure
| Condition | USP assay | Typical TU method | Why the result moves |
|---|---|---|---|
| pH | 6.0 | 6.0 or 7.0 depending on the method sheet | Papain is not equally active across its pH window |
| Temperature | 40 °C | 40 °C, sometimes 37 °C | A rate at one temperature is not a rate at another |
| Incubation time | 60 minutes | Rate expressed per minute | Time base changes the number by a large factor |
| Detection | Absorbance at 280 nm | 275 nm or a colorimetric finish | Different signals and calibration curves |
| Standard | USP Papain Reference Standard | In-house standard, sometimes calibrated to USP | The standard anchors the scale |
The USP definition also includes the 40 µg/mL normalization. Drop that step and the number may still look like a USP unit, but it is not one. This is why a certificate should say more than “USP method”: it should name the reference standard, the substrate, the pH, the temperature and the incubation time.
Why 6,000 USP/mg is not 6,000 TU/mg
If TU is defined per minute and the USP unit is anchored to a 60-minute incubation, a powder at 6,000 USP units/mg sits near 100 TU/mg. Some trade listings for a 6,000 USP units/mg papain quote roughly 90–110 TU/mg, which is the same material described on two time bases. The factor is about sixty, but only while the substrate, pH, temperature, detection and standard stay equivalent.
Change any of those and the ratio moves. A TU method at pH 7.0 can read differently from a USP assay at pH 6.0; a colorimetric finish can disagree with absorbance at 280 nm; an in-house standard can drift from the USP reference. A supplier who quotes 6,000 TU/mg for a 6,000 USP units/mg powder has either defined TU on a different basis or made an error.
What is exact is the total unit count inside one system. One kilogram at 6,000 USP units/mg carries 6 × 109 USP units; the same kilogram at 100 TU/mg carries 108 TU. Both statements describe the same powder, and neither can be converted into the other without an assay. The identity page makes the unit part of the material description for this reason.
What the label and specification should say
Under the EU food enzyme framework, a food enzyme preparation sold to a manufacturer carries its declared activity in the stated unit, together with the name, the food-use statement, the lot and the storage conditions. In the United States the activity is a specification, not a nutrient, so it does not belong in a nutrition panel as though it had a daily value; if the enzyme has a function in the finished food, the ingredient declaration names it. The UK follows assimilated EU law, with its own authorisation route. In every market the label needs the unit, and the specification needs the method.
“USP” is a pharmacopoeial designation. Writing “6,000 USP units/mg” says which assay produced the figure; it does not by itself certify the lot as a USP article, because the monograph also sets pH and loss-on-drying limits that a food-grade specification may set differently. If a customer needs the full monograph, that is a separate specification and should be quoted as one. State the basis as well: activity as-is or on dry solids, and at release or at the end of shelf life.
Which unit to specify
Specify the unit the customer's specification and your goods-in method can actually verify. Choose USP units/mg when the buyer is in the United States, when the purchase order or the pharmacopoeial reference is written in USP units, or when the blend is already dosed in USP units. Choose TU when the supplier's existing system and the customer's formula are both in TU, and the method sheet defines the time base. Do not mix the two in one formula without a measured bridge.
If both figures are needed, put one in the specification as the release criterion and the other on the certificate as an informational result, and run both assays on the same lot. A calculated second figure is not a measurement. The catalog activity and the grade options are on the grades page; the certificate lines are on the COA page; the unit vocabulary is in the assay glossary entry; and the product specification is on the papain product page.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation