02 Grade comparison

L-Methionine grades: enantiomer, assay and particle size

Technical document 02 · Reviewed 2026-11-19 · L-Methionine

On this page
  1. Why L-methionine has more than one grade
  2. The grades and what changes
  3. Particle size, flow and the 40 mesh line
  4. Capsules, tablets and powder blends
  5. What to write into the specification
  6. When the grade is the wrong choice

L-Methionine is sold as the enantiopure amino acid, and the grade decision has three parts: the enantiomer, the assay and the particle. The catalog grade is 98.5–101.5% by HPLC, with a specific rotation of +21.0° to +23.0° on the dried basis and ≥95% through 40 mesh. The enantiomer question is a different-substance question and is compared on its own page; the assay and the particle are handling decisions on the same substance.

In one line

The grade decision has three layers: the enantiomer decides what the substance is, and the assay and the particle decide how it handles.

Why L-methionine has more than one grade

A grade is a specification a buyer can release against, not a rank order of quality. The word “methionine” on a quotation can hide three separate decisions, and each one changes a different part of the paperwork.

The first is the enantiomer. L-Methionine (CAS 63-68-3) and DL-methionine (CAS 59-51-8) are different substances with different certificates, different rotations and different label names. No assay figure or particle size turns one into a grade of the other; that comparison belongs on the L versus DL page.

The second is purity: the catalog range is 98.5–101.5% by HPLC on the stated basis, with loss on drying at ≤0.5%. A narrower assay is a specification change, not a different molecule. The third is the physical grade. A 40 mesh powder, a granulated powder and a powder diluted on a carrier can carry the same assay and the same rotation, and they behave differently in a capsule line, a tablet press and a blend.

The grades and what changes

L-Methionine grades and what a buyer signs up for
GradeWhat it isWhere it fitsWhat changes
Catalog powderFree L-methionine, 98.5–101.5%, ≥95% through 40 meshCapsules, tablets and blends where a fine powder is workableThe baseline specification
GranulatedThe same material, agglomerated to a coarser particleHigh-speed capsule and tablet lines; blends that must not dustParticle distribution, bulk density and flow; assay and rotation stay
DilutionL-Methionine on a declared carrierA lower potency per gram for a small-dose premixAssay per gram, carrier declaration, particle size
DL-MethionineThe 1:1 racemate, CAS 59-51-8Feed and other markets that name the racemateThe substance, the rotation and the label

The last row is not a grade of L-methionine. It is in the table because a quotation may use the same word for both, and the first question to ask is which CAS number will appear on the certificate. The first three rows are the same substance at different assay levels and particle sizes.

Particle size, flow and the 40 mesh line

Forty mesh is about 420 µm, and “≥95% through” allows up to 5% to be retained on the sieve. The catalog powder is therefore a fine crystalline solid, not a dust-free granule. It disperses well in a blend, and it also dusts, carries static and can segregate from coarser excipients in a hopper.

Granulation changes the particle without changing the chemistry. The particles become larger and rounder, bulk density and flow improve, and the dust falls. The assay, the rotation and the identity tests are the same tests on the same molecule, but the particle-size line and the bulk density belong to the granulated grade and should be written for it. A certificate that carries the 40 mesh line while the drum holds a granulated powder is describing the wrong grade.

Match the particle size to the blend, not only to the process. A fine amino acid in a coarse blend can separate in a hopper or a stick-pack line, and the fill weight will drift even when every component is within specification. Ask for the distribution, not only the pass figure. Comparisons with other amino acids do not transfer either: glycine is freely soluble and sweet, while methionine is less soluble and carries a sulfurous note, so a particle and taste decision made for glycine is not a decision for methionine.

Capsules, tablets and powder blends

A capsule or a tablet takes the solid powder, and the choice between the catalog powder and the granulated grade is a flow decision. Direct compression and high-speed encapsulation usually prefer the granulated grade; wet granulation can start from the fine powder because the process builds its own granules. The fill weight is set by the label: a capsule that declares 500 mg of L-methionine needs 500 ÷ 0.992 = 504 mg of a lot that assays 99.2%, and 508 mg of a lot at 98.5%. The label declares the amino acid; the balance weighs the powder.

A powder blend or a stick pack takes the fine powder for dispersion, and the taste is a formula question. Methionine has a sulfurous note that is noticeable in an unflavoured drink, and granulation does not remove it. A dilution can lower the potency per gram, but it adds a carrier that the label has to declare.

The dosage form does not change the specification of the molecule. A capsule, a tablet and a stick pack all need the same assay, identity and rotation; they differ in the particle, the carrier and the fill arithmetic. Write the grade into the purchase order as well as the product name, because “L-methionine” alone does not say which powder is being bought.

What to write into the specification

  • “L-Methionine, CAS 63-68-3, C5H11NO2S.”
  • “Assay 98.5–101.5% by HPLC; the certificate states the basis.”
  • “Specific rotation +21.0° to +23.0° on the dried basis, with solvent and temperature named.”
  • “Identification by IR and HPLC against a reference.”
  • “Loss on drying ≤0.5%; pH (1% solution) 5.0–7.0.”
  • “Particle size ≥95% through 40 mesh, or the granulated grade's distribution and bulk density.”
  • “Heavy metals and microbiology as listed; the carrier declared if the grade is a dilution.”
  • “Destination market and the label form confirmed before the order.”

When the grade is the wrong choice

A dilution is the wrong choice when the label declares the pure amino acid and the carrier is not on the panel. A granulated grade is the wrong choice when the process needs a fine powder for a suspension, because the coarser particle takes longer to disperse. A finer mesh is not automatically better: it adds dust and handling, and the blend may not need it.

The grade belongs in the specification before the artwork and the purchase order are fixed. The product hub carries the catalog specification; the COA page shows how each grade is released; the MOQ page covers packs and lead time; the identity page covers the tests that hold across the grades.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation