02 Grade comparison

L-isoleucine or L-alloisoleucine: choosing a grade

Technical document 02 · Reviewed 2026-11-19 · L-Isoleucine

On this page
  1. Why the form is the grade
  2. The grades side by side
  3. Particle size, flow and the powder
  4. What fits the dosage form
  5. What changes when you switch
  6. When not to switch

L-isoleucine and L-alloisoleucine share a formula, a molecular weight and a titration response; they differ at one carbon. Only L-isoleucine has an established place in a food supplement, and inside that material the grade decision is mesh, granulation and whether the amino acid ships alone or inside a blend. The label follows the molecule, not the mesh.

In one line

The epimers differ at one carbon and in everything the label touches: the rotation, the assay basis, the permitted use and the ingredient name.

Why the form is the grade

“Grade” is used loosely in amino acid buying, and it covers four separate decisions. The first is the molecule: L-isoleucine or L-alloisoleucine, the C-3 epimer. The second is the particle: the catalog standard is a crystalline powder with ≥95% through 40 mesh. The third is granulation, available on request for flow. The fourth is the blend: a single amino acid, or one component of a branched-chain mix.

The first decision is not a grade at all. Two materials can both assay at 99.5% on the dried basis and still be different compounds, because the titration counts acid groups and both epimers have one. The second and third decisions change how the powder runs through a filling machine. They do not change what the label may say.

A grade change is a specification change. If the certificate says 40 mesh and the order asks for 80, the certificate belongs to a different lot; if the specification says L-isoleucine and the drum holds the allo epimer, the specification and the label are both wrong. Keep the molecule, the mesh and the blend as three separate lines on the purchase order.

The grades side by side

Isoleucine grades and what each one is for
GradeWhat it isWhere it fitsLabel name
L-isoleucine, 40 meshCrystalline powder, ≥95% through 40 meshCapsules, tablets, dry blendsL-isoleucine
L-isoleucine, 80 meshMilled finer, quoted on requestBlends that need uniformity, suspensionsL-isoleucine
L-isoleucine, granulatedAgglomerated for flow, quoted on requestHigh-speed tableting, dust controlL-isoleucine
Isoleucine in a blendFixed ratio with leucine and valinePremix, stick pack, capsule blendThe blend and each amino acid
L-alloisoleucineThe C-3 epimer, reference gradeAnalytical standard, method workNot a supplement ingredient

The first three rows change the powder, the fourth changes the formula, and the last changes the chemistry and the permission. A quotation that says only “isoleucine 99%” has not told you which row it is quoting.

Particle size, flow and the powder

Mesh is a sieve number, not a particle dimension. A 40-mesh sieve has openings of about 420 µm and an 80-mesh sieve about 177 µm, so “≥95% through 40 mesh” means at most 5% is retained on that screen. The top of the distribution is controlled; the fines below it are not, and fines are what dust, segregate and bridge in a hopper.

Milling to 80 mesh buys blend uniformity in a low-dose premix and trades away flow. The finer powder aerates, packs on the hopper wall and can hold more surface water, which shows up as caking before the assay moves. Granulation reverses the trade: it builds agglomerates that flow and compress, and it slows the time the powder takes to disperse in water.

Bulk density and flow belong on the technical data sheet for the grade being quoted. They are lot properties, not constants, and a capsule filler set up on one lot will not necessarily run at the same speed on the next.

What fits the dosage form

A capsule or tablet is the simplest home. The powder is dry, the dose is weighed, and solubility never enters the calculation. The 40-mesh grade fills a standard shell; the granulated grade helps a high-speed press hold weight and reduces the dust in the room.

A stick pack or a drink mix brings solubility into the decision. L-isoleucine dissolves to about 34–41 g/L at 25 °C, so 100 mL of water carries roughly 3.4–4 g at the ceiling; a larger dose needs a larger volume or a suspension. Isoleucine also tastes bitter, so a drink mix usually needs a flavour system that covers it.

A ready-to-drink product adds pH and heat. Solubility rises in dilute acid and in alkali, and the pH of the finished drink is a formulation choice; a hot fill then gives the amino acid more opportunity to react with any reducing sugar in the formula. Test the finished matrix, not only water.

A blend is a formula decision, not a grade of isoleucine. In a 2:1:1 leucine : isoleucine : valine premix, the ratio is declared per amino acid and the isoleucine assay does not set it. A single-amino-acid panel and a blend panel are different labels.

What changes when you switch

A switch between L-isoleucine grades keeps the name, the CAS number and the label, and moves the physical clauses: mesh, bulk density, flow, dispersion time and the water limit that the finer powder needs. The assay basis and the rotation stay as they were, because the molecule has not changed.

A switch to L-alloisoleucine moves everything else: the CAS number, the rotation, the specification, the regulatory position and the label. That switch is not a grade change, and it should never be made to solve a flow problem.

  • Mesh and granulation: the certificate, the technical data sheet and the filling trial move together.
  • Blend: the ratio, the other two assays and the label declaration are new work.
  • Epimer: a new molecule with a new identity test, a new rotation range and no automatic food use.
  • Water and flow: the finer or granulated grade may need its own stability and caking data.

When not to switch

Do not switch to L-alloisoleucine, D-isoleucine or a DL mixture for a food or supplement product. None of them carries the established use of L-isoleucine, and a certificate for one does not release another. If a supplier offers “isoleucine” without naming the stereochemistry, mark the quotation incomplete.

Do not mill finer than the process needs. An 80-mesh powder in a capsule line that already runs well adds dust, cleaning time and caking risk for no gain. Do not granulate a product that has to disperse quickly in a stick pack, and do not accept a blend where the panel declares a single amino acid.

The epimer comparison is carried further on the L-isoleucine versus L-alloisoleucine page. The release tests for each grade are on the COA page, the powder and solution behaviour on the stability page, and the market position on the compliance page. The product hub carries the catalog specification, the packs and minimum on the MOQ page, and particle size is defined in the glossary.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation