Dosage form note · sports nutrition
Sports Nutrition
Uniformity across a tub, a stick and a shaker
The brief
Sports nutrition formats combine the mineral with protein, carbohydrate and electrolytes, and the powder has to stay uniform through mixing, filling and storage. Bulk density and particle size decide whether the chelate segregates from a lighter or denser blend; a 40-mesh crystalline grade and a milled 80-mesh grade behave differently in a tub and in a stick. The alkaline pH of the 5% suspension belongs in the compatibility check alongside sodium, potassium and acidity regulators. Moisture and heat are the limits: caking in a tub, browning in a flavoured blend, and loss of flow after a humid fill. The label has to name the chelate, not just magnesium. Rainwood supplies the powder; blending and filling sit with your manufacturer.
Matched ingredients
- Magnesium Bisglycinate — 13.5–14.2% (complexometric EDTA)
What changes in this format
Three constraints, one grade decision.
The same powder can pass one constraint and fail another. The trial should test all three.
Blend uniformity across density differences
A 0.55–0.90 g/mL chelate can segregate from a lighter carbohydrate or a denser mineral salt during mixing and filling. Particle size and density have to be matched across the blend, not checked only on the chelate. A uniformity test on the finished blend is the evidence that matters.
Solubility in a shaker
A protein or carbohydrate blend can slow wetting and leave the chelate as a grit at the bottom of the shaker. An 80-mesh grade disperses faster than a coarse crystalline grade, but it also raises dust and static in the filling room. The grade choice is a compromise between dispersion and handling.
Electrolyte and pH interactions
The chelate's alkaline pH sits alongside sodium, potassium and chloride salts, and the acid system used for flavour. The combination changes the taste and the pH of the mixed drink, not the magnesium assay. Test the full electrolyte blend rather than the mineral in water alone.
Moisture in tubs and sticks
A tub is opened repeatedly, and a stick pack has a high surface-to-mass ratio, so both formats expose the powder to moisture. The chelate's hygroscopicity and the blend's reducing sugars can produce caking or browning during storage. Packaging, humidity and loss on drying belong in the stability plan from the first trial.
Ingredients for this application
Starting points, not a shortlist limit.
Every grade is quoted against the specification and the process, not against the application label.
Next step
Describe the finished product. We will name the grade.
The dose, the process step, the taste and the destination are enough to start a specification review.